LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
TI TPS3823-33DBVR product image
  • TPS3823-33DBVR thumbnail 1
  • TPS3823-33DBVR thumbnail 2
  • TPS3823-33DBVR thumbnail 3
  • Pinout Diagram
  • Footprint Diagram
Images for reference only

TI TPS3823-33DBVRRoHS

Manufacturer
MPN
TPS3823-33DBVR
LCSC Part #
C7719
Packaging
SOT-23-5
Customer #
Key Attributes
Processor Supervisory Circuits
Datasheetpdf iconTI TPS3823-33DBVR

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Supervisors
ManufacturerTI
PackagingSOT-23-5
Reset Timeout1.6s
Operating Temperature-40℃~+85℃
output typePush-pull
Reset Active LevelActive Low
Voltage - Supply2.5V;3V;3.3V;5V
ChipTypeVoltage monitor
Standby Current15uA
Threshold Voltage2.93V
FunctionWatchdog timer;Manual reset input
Number of Voltages Monitored1

Additional Information

TypeDetails
Minimum5
Multiple5
Standard Packaging3000
Sales UnitPiece

Introduction

AI Translation

The TPS382x family of supervisors provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. During power-on, RESET asserts when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supply voltage supervisor monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage, VIT-. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time, td, starts after VDD has risen above the threshold voltage, VIT-. When the supply voltage drops below the threshold voltage VIT-, the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense threshold voltage, VIT-, set by an internal voltage divider. The TPS3820/3/5/8 devices incorporate a manual reset input, MR. A low level at MR causes RESET to become active. The TPS3824/5 devices include a high-level output RESET. TPS3820/3/4/8 have a watchdog timer that is periodically triggered by a positive or negative transition at WDI. When the supervising system fails to retrigger the watchdog circuit within the time-out interval, Itout, RESET becomes active for the time period td. This event also reinitializes the watchdog timer. Leaving WDI unconnected disables the watchdog. In applications where the input to the WDI pin may be active (transitioning high and low) when the TPS3820/3/4/8 is asserting RESET, the TPS3820/3/4/8 does not return to a non-reset state when the input voltage is above VT. If the application requires that input to WDI is active when RESET pin is asserted, then the “A” version of the device should be used. The “A” versions will not latch the RESET to the asserted state if a WDI pulse is received while RESET is asserted. The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are available in an SOT23-5 package. The TPS382x devices are characterized for operation over a temperature range of -40°C to 85°C.

Features

AI Translation
  • Power-On Reset Generator With Fixed Delay Time of 200 ms (TPS3823/4/5/8) or 25 ms (TPS3820)
  • Manual Reset Input (TPS3820/3/5/8)
  • Reset Output Available in Active-Low (TPS3820/3/4/5), Active-High (TPS3824/5) and Open-Drain (TPS3828)
  • Supply Voltage Supervision Range: 2.5 V, 3 V, 3.3 V, 5 V
  • Watchdog Timer (TPS3820/3/4/8)
  • Supply Current of 15 μA (Typ)
  • SOT23-5 Package
  • Temperature Range: -40°C to 85°C

Applications

AI Translation
  • Applications Using DSPs, Microcontrollers, or Microprocessors
  • Industrial Equipment
  • Programmable Controls
  • Automotive Systems
  • Portable/Battery-Powered Equipment
  • Intelligent Instruments
  • Wireless Communications Systems
  • Notebook/Desktop Computers
In-Stock: 45,765
45,765 In stock, ships now
Add to BOM List
QtyUnit PriceTotal Amount
5+$ 0.2273$ 1.14
50+$ 0.1765$ 8.83
150+$ 0.1518$ 22.77
500+$ 0.1297$ 64.85
3,000+$ 0.1236$ 370.80
6,000+$ 0.12$ 720.00
Standard Packaging3000/Full Reel
Better price for more quantity?
$