- Pinout
- Footprint
Shikues EABS26
| Manufacturer | ShikuesAsian Brands |
| MPN | EABS26 |
| LCSC Part # | C475747 |
| Packaging | ABS |
| Customer # | |
| Key Attributes | BRIDGE RECT 600V 2A ABS |
| Datasheet |  Shikues EABS26 |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Discrete Semiconductors/Diodes/Bridge Rectifiers | |
| Manufacturer | Shikues | |
| Packaging | ABS | |
| Non-Repetitive Peak Forward Surge Current | 50A | |
| Operating Junction Temperature Range | -55℃~+150℃ | |
| Voltage - Forward(Vf@If) | 1.7V@2A | |
| Reverse Leakage Current (Ir) | 5uA@600V | |
| Current - Rectified | 2A | |
| Voltage - DC Reverse(Vr) | 600V |
Additional Information
| Type | Details |
|---|---|
| Minimum | 10 |
| Multiple | 10 |
| Standard Packaging | 5000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
This device is a surface mount ultrafast recovery bridge rectifier with a reverse voltage range of -100 to 600V and a forward current of 2A. Mechanical data includes ABS/LBF package, leads compliant with applicable soldering standards, and a weight of approximately 88mg. Maximum ratings and characteristics are given at an ambient temperature of 25°C, applicable to single-phase, half-wave, 60Hz, resistive or inductive loads; for capacitive loads, current must be derated by 20%. Characteristic measurement conditions include: measured at 1MHz frequency and 4VDC reverse bias; measured at IF=0.5A, IR=1A, Irr=0.25A; mounted on a glass epoxy PCB with a copper pad of specified dimensions. The document also includes charts covering reverse recovery time characteristics with test circuit diagrams, maximum average forward current ratings, typical forward characteristics, maximum non-repetitive peak forward surge current, typical reverse characteristics, typical junction capacitance, and typical transient thermal impedance. The package is a plastic surface mount type with 4 leads, and recommended pad dimensions and marking information are provided.
Features
- Surface mount application
- Low-profile package
- Glass passivated chip junction
- Ultra-fast reverse recovery time
- Lead-free design compliant with EU RoHS 2011/65/EU directive
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 10+ | $ 0.073$ 0.0694 | $ 0.69 |
| 100+ | $ 0.0588$ 0.0559 | $ 5.59 |
| 300+ | $ 0.0516$ 0.0491 | $ 14.73 |
| 1,000+ | $ 0.0463$ 0.0440 | $ 44.00 |
| 5,000+ | $ 0.037$ 0.0352 | $ 176.00 |
| 10,000+ | $ 0.0349$ 0.0332 | $ 332.00 |
Standard Packaging5000/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Discrete Semiconductors/Diodes/Bridge Rectifiers | |
| Manufacturer | Shikues | |
| Packaging | ABS | |
| Non-Repetitive Peak Forward Surge Current | 50A | |
| Operating Junction Temperature Range | -55℃~+150℃ | |
| Voltage - Forward(Vf@If) | 1.7V@2A | |
| Reverse Leakage Current (Ir) | 5uA@600V | |
| Current - Rectified | 2A | |
| Voltage - DC Reverse(Vr) | 600V |
Additional Information
| Type | Details |
|---|---|
| Minimum | 10 |
| Multiple | 10 |
| Standard Packaging | 5000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
This device is a surface mount ultrafast recovery bridge rectifier with a reverse voltage range of -100 to 600V and a forward current of 2A. Mechanical data includes ABS/LBF package, leads compliant with applicable soldering standards, and a weight of approximately 88mg. Maximum ratings and characteristics are given at an ambient temperature of 25°C, applicable to single-phase, half-wave, 60Hz, resistive or inductive loads; for capacitive loads, current must be derated by 20%. Characteristic measurement conditions include: measured at 1MHz frequency and 4VDC reverse bias; measured at IF=0.5A, IR=1A, Irr=0.25A; mounted on a glass epoxy PCB with a copper pad of specified dimensions. The document also includes charts covering reverse recovery time characteristics with test circuit diagrams, maximum average forward current ratings, typical forward characteristics, maximum non-repetitive peak forward surge current, typical reverse characteristics, typical junction capacitance, and typical transient thermal impedance. The package is a plastic surface mount type with 4 leads, and recommended pad dimensions and marking information are provided.
Features
- Surface mount application
- Low-profile package
- Glass passivated chip junction
- Ultra-fast reverse recovery time
- Lead-free design compliant with EU RoHS 2011/65/EU directive
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | - |
| CNHTS | 8504409190 |
| USHTS | 8504409540 |
| TARIC | 8504409590 |
| CAHTS | 8504409099 |
| BRHTS | 85044090 |
| INHTS | 85044090 |
| MXHTS | 8504.40.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | - |
| CNHTS | 8504409190 |
| USHTS | 8504409540 |
| TARIC | 8504409590 |
| Type | Details |
|---|---|
| CAHTS | 8504409099 |
| BRHTS | 85044090 |
| INHTS | 85044090 |
| MXHTS | 8504.40.99 |