ESPRESSIF ESP32-C6-MINI-1U-H4

ESP32-C6-MINI-1 and ESP32-C6-MINI-1U are general-purpose Wi-Fi, IEEE 802.15.4, and Bluetooth LE modules with powerful performance and rich peripheral interfaces, suitable for smart home, industrial automation, healthcare, consumer electronics, and other applications. ESP32-C6-MINI-1 uses a PCB on-board antenna, while ESP32-C6-MINI-1U connects to an external antenna via a connector. Both modules are equipped with SPI flash, with a maximum option of 8 MB. These modules are based on the ESP32-C6FH4/ESP32-C6FH8 chip, featuring a RISC-V 32-bit single-core processor.

• Onboard ESP32-C6FH4/ESP32-C6FH8 chip, RISC-V 32-bit single-core processor, clock frequency up to 160 MHz
• ROM: 320 KB, HP SRAM: 512 KB, LP SRAM: 16 KB, flash up to 8 MB
• Wi-Fi operating at 2.4 GHz band, 1T1R, operating channel center frequency range: 2412~2484 MHz
• Supports IEEE 802.11ax protocol, including 20 MHz-only non-AP mode, MCS0~MCS9, uplink/downlink OFDMA, downlink MU-MIMO, beamformee, CQI, DCM, spatial reuse, and TWT
• Fully compatible with IEEE 802.11b/g/n, supports 20 MHz and 40 MHz bandwidth, data rate up to 150 Mbps, supports WMM, frame aggregation, immediate block ACK, fragmentation and defragmentation, TXOP, automatic Beacon monitoring, 4× virtual Wi-Fi interfaces; simultaneous support for infrastructure Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous mode; supports 802.11mc FTM
• Bluetooth LE certified with Bluetooth 5.3, supports Bluetooth mesh, high power mode, data rates of 125 Kbps, 500 Kbps, 1 Mbps, and 2 Mbps, advertising extensions, multiple advertising, channel selection algorithm #2, and power control; Wi-Fi and Bluetooth coexistence with shared antenna
• Compatible with IEEE 802.15.4-2015, operating at 2.4 GHz band, supports O-QPSK PHY, data rate: 250 Kbps, supports Thread 1.3 and Zigbee 3.0
• Peripherals include GPIO, SPI, parallel IO, UART, I2C, I2S, RMT, pulse counter, LED PWM, USB serial/JTAG controller, MCPWM, SDIO 2.0 slave controller, GDMA, TWA controller, on-chip JTAG debugging, event task matrix, ADC, temperature sensor, system timer, general-purpose timers, and watchdog timers
• Integrated 40 MHz crystal oscillator
• Antenna options: onboard PCB antenna or external antenna via connector
• Operating/supply voltage: 3.0~3.6 V
• Operating temperature: -40~85℃ variant or -40~105℃ variant
• Certifications include RF certification and environmental certification
• Testing includes HTOL, HTSL, AMAST, TCT, and ESD

• Smart Home
• Industrial Automation
• Healthcare
• Consumer Electronics
• Smart Agriculture