LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
ADI AD8495ARMZ-R7 product image
  • AD8495ARMZ-R7 thumbnail 1
  • AD8495ARMZ-R7 thumbnail 2
  • AD8495ARMZ-R7 thumbnail 3
  • Pinout Diagram
  • Footprint Diagram
Images for reference only

ADI AD8495ARMZ-R7RoHS

Manufacturer
MPN
AD8495ARMZ-R7
LCSC Part #
C59658
Packaging
MSOP-8
Customer #
Key Attributes
Precision Thermocouple Amplifiers with Cold Junction Compensation
Datasheetpdf iconADI AD8495ARMZ-R7

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Interface/Sensor and Detector Interfaces
ManufacturerADI
PackagingMSOP-8
Ib - Input Bias Current25uA
FeaturesInput fault detection;Overvoltage protection;Programmable reference voltage
Single Supply2.7V~3.6V
Operating Temperature-40℃~+125℃
The Chip TypeThermocouple Amplifier

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging1000
Sales UnitPiece

Introduction

AI Translation

The AD8494/AD8495/AD8496/AD8497 are precision instrumentation amplifiers with thermocouple cold junction compensators on an integrated circuit. They produce a high level (5 mV/°C) output directly from a thermocouple signal by combining an ice point reference with a precalibrated amplifier. They can be used as standalone thermometers or as switched output setpoint controllers using either a fixed or remote setpoint control. The AD8494/AD8495/AD8496/AD8497 can be powered from a single-ended supply (less than 3 V) and can measure temperatures below 0°C by offsetting the reference input. To minimize selfheating, an unloaded AD849x typically operates with a total supply current of 180 μA, but it is also capable of delivering in excess of ±5 mA to a load. The AD8494 and AD8496 are precalibrated by laser wafer trimming to match the characteristics of J type (iron-constantan) thermocouples; the AD8495 and AD8497 are laser trimmed to match the characteristics of K type (chromel-alumel) thermocouples. The AD8494/AD8495/AD8496/AD8497 allow a wide variety of supply voltages. With a 5 V single supply, the 5 mV/°C output allows the devices to cover nearly 1000 degrees of a thermocouple’s temperature range. The AD8494/AD8495/AD8496/AD8497 work with 3V supplies, allowing them to interface directly to lower supply ADCs. They can also work with supplies as large as 36 V in industrial systems that require a wide common-mode input range.

Features

AI Translation
  • Low cost and easy to use
  • Pretrimmed for J or K type thermocouples
  • Internal cold junction compensation
  • High impedance differential input
  • Standalone 5 mV/°C thermometer
  • Reference pin allows offset adjustment
  • Thermocouple break detection
  • Laser wafer trimmed to ±1°C initial accuracy and 0.025°C/°C ambient temperature rejection
  • Low power: < 1 mW at VS = 5 V
  • Wide power supply range Single supply: 2.7 V to 36 V Dual supply: ±2.7 V to ±18 V
  • Small, 8-lead MSOP

Applications

AI Translation
  • J or K type thermocouple temperature measurement
  • Setpoint controller
  • Celsius thermometer
  • Universal cold junction compensator
  • White goods (oven, stove top) temperature measurements
  • Exhaust gas temperature sensing
  • Catalytic converter temperature sensing
In-Stock: 416
416 In stock, ships now
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 5.9786$ 5.98
10+$ 5.2119$ 52.12
30+$ 4.7568$ 142.70
100+$ 4.0224$ 402.24
500+$ 3.8109$ 1905.45
1,000+$ 3.7141$ 3714.10
Standard Packaging1000/Full Reel
Better price for more quantity?
$