LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
TI SN65HVD3082EDR product image
  • SN65HVD3082EDR thumbnail 1
  • SN65HVD3082EDR thumbnail 2
  • SN65HVD3082EDR thumbnail 3
  • Pinout Diagram
  • Footprint Diagram
Images for reference only

TI SN65HVD3082EDRRoHS

Manufacturer
MPN
SN65HVD3082EDR
LCSC Part #
C6912
Packaging
SOIC-8
Customer #
Key Attributes
Low-Power RS-485 Transceivers, Available in a Small MSOP-8 Package
Datasheetpdf iconTI SN65HVD3082EDR

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers
ManufacturerTI
PackagingSOIC-8
Voltage - Supply4.5V~5.5V
TypeTransceiver
Data Rate200Kbps
Number of Nodes256
Operating Temperature-40℃~+85℃
ESD Protect±15kV
Number of Drivers1
DuplexHalf-Duplex
FeaturesTx/Rx enable;Enable shutdown;Fail-safe;Thermal shutdown protection;Low-power mode
Number of Receivers1
Quiescent Supply Current300uA

Additional Information

TypeDetails
Minimum5
Multiple5
Standard Packaging2500
Sales UnitPiece

Introduction

AI Translation

These devices are half-duplex transceivers designed for RS–485 data bus networks. Powered by a 5–V supply, they are fully compliant with TIA/EIA-485A standard. With controlled transition times, these devices are suitable for transmitting data over long twisted-pair cables. SN65HVD3082E and SN75HVD3082E devices are optimized for signaling rates up to 200 kbps. SN65HVD3085E is suitable for data transmission up to 1 Mbps, whereas SN65HVD3088E is suitable for applications requiring signaling rates up to 20 Mbps. These devices are designed to operate with very low supply current, typically 0.3 mA, exclusive of the load. When in the inactive shutdown mode, the supply current drops to a few nanoamps, making these devices ideal for power-sensitive applications.

The wide common-mode range and high ESD protection levels of these devices make them suitable for demanding applications such as energy meter networks, electrical inverters, status/command signals across telecom racks, cabled chassis interconnects, and industrial automation networks where noise tolerance is essential. These devices match the industry-standard footprint of SN75176. Power-on reset circuits keep the outputs in a high impedance state until the supply voltage has stabilized. A thermal shutdown function protects the device from damage due to system fault conditions. The SN75HVD3082E is characterized for operation from 0°C to 70°C and SN65HVD308xE are characterized for operation from -40°C to 85°C air temperature.

Features

AI Translation
  • Available in a Small MSOP-8 Package
  • Meets or Exceeds the Requirements of the TIA/EIA−485A Standard
  • Low Quiescent Power
    • 0.3 mA Active Mode
    • 1 nA Shutdown Mode
  • 1/8 Unit Load—Up to 256 Nodes on a Bus
  • Bus-Pin ESD Protection Up to 15 kV
  • Industry-Standard SN75176 Footprint
  • Failsafe Receiver (Bus Open, Bus Shorted, Bus Idle)
  • Glitch–Free Power–Up/Down Bus Inputs and Outputs

Applications

AI Translation
  • Energy Meter Networks Motor Control
  • Power Inverters
  • Industrial Automation
  • Building Automation Networks
  • Battery-Powered Applications
  • Telecommunications Equipment
In-Stock: 50,000
50,000 In stock, ships now
Add to BOM List
QtyUnit PriceTotal Amount
5+$ 0.2152$ 1.08
50+$ 0.1691$ 8.46
150+$ 0.1467$ 22.01
500+$ 0.1266$ 63.30
2,500+$ 0.1211$ 302.75
5,000+$ 0.1178$ 589.00
Standard Packaging2500/Full Reel
Better price for more quantity?
$