MICROCHIP dsPIC33FJ256MC710A-I/PF

16-bit Digital Signal Controllers (up to 256 KB Flash and 30 KB SRAM) with Motor Control and Advanced Analog

• Code-efficient (C and Assembly) architecture
• Two 40-bit wide accumulators
• Single-cycle (MAC/MPY) with dual data fetch
• Single-cycle mixed-sign MUL plus hardware divide
• ±2% internal oscillator
• Programmable PLLs and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer (WDT)
• Fast wake-up and start-up
• Low-power management modes (Sleep, Idle, Doze)
• Integrated Power-on Reset and Brown-out Reset
• 1.35 mA/MHz dynamic current (typical)
• 55 μA IPD current (typical)
• Up to four PWM generators with eight outputs
• Dead Time for rising and falling edges
• 12.5 ns PWM resolution
• PWM support for Motor Control: BLDC, PMSM, ACIM, and SRM
• Programmable Fault inputs
• Flexible trigger for ADC conversions and configurations
• Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H
• 18 analog inputs on 64-pin devices and up to 32 analog inputs on 100-pin devices
• Flexible and independent ADC trigger sources
• Up to nine 16-bit timers/counters. Can pair up to make four 32-bit timers.
• Eight Output Compare modules configurable as timers/counters
• Eight Input Capture modules
• Two UART modules (10 Mbps) with support for LIN 2.0 protocols and IrDA
• Two 4-wire SPI modules (15 Mbps)
• Up to two I²C modules (up to 1 Mbaud) with SMBus support
• Up to two Enhanced CAN (ECAN) modules (1 Mbaud) with 2.0B support
• Quadrature Encoder Interface (QEI) module
• Data Converter Interface (DCI) module with I²S codec support
• Sink/Source up to 10 mA (pin specific) for standard VOH/VOL, up to 16 mA (pin specific) for nonstandard VOH1
• 5V-tolerant pins
• Selectable open drain, pull-ups, and pull-downs
• Up to 5 mA overvoltage clamp current
• External interrupts on all I/O pins
• AEC-Q100 REVG (Grade 1 -40℃ to +125℃)
• AEC-Q100 REVG (Grade 0 -40℃ to +150℃)
• Class B Safety Library, IEC 60730
• In-circuit and in-application programming
• Two program and two complex data breakpoints
• IEEE 1149.2-compatible (JTAG) boundary scan
• Trace and run-time watch

• Supports various motor control applications, including BLDC motors, single-phase and three-phase induction motors, and switched reluctance motors
• Uninterruptible Power Supply (UPS)
• Inverters
• Switched-mode power supplies
• Power factor correction
• Power management modules in servers, telecommunications equipment, and other industrial devices