LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
TI TPS26600PWPT product image
  • TPS26600PWPT thumbnail 1
  • TPS26600PWPT thumbnail 2
  • TPS26600PWPT thumbnail 3
  • Pinout Diagram
  • Footprint Diagram
Images for reference only

TI TPS26600PWPTRoHS

Manufacturer
TI
MPN
TPS26600PWPT
LCSC Part #
C202261
Packaging
HTSSOP-16-EP
Customer #
Key Attributes
4.2V~55V HTSSOP-16-EP Current Regulation/Management RoHS
Datasheetpdf iconTI TPS26600PWPT
Out of Stock
Notify Me
Add to BOM List
QtyUnit Price(Reference Only)Total Amount
1+$ 4.6132$ 4.61
10+$ 3.9614$ 39.61
30+$ 3.5739$ 107.22
250+$ 3.1815$ 795.38
500+$ 3.0015$ 1500.75
1,000+$ 2.9188$ 2918.80
Standard Packaging250/Full Reel
Better price for more quantity?
$

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Current Regulation/Management
ManufacturerTI
PackagingHTSSOP-16-EP
FeaturesOvercurrent Protection;Short-Circuit Protection;Overvoltage clamping protection;Under-voltage lockout;Thermal Protection;Overload protection
FET TypeIntegrated FET
Width4.4mm
Trigger Current100mA~2.23A
Threshold Voltage-
Length5mm
Height1mm
Number of Channels-
Peak Output Current(Source)-
Voltage - Supply4.2V~55V
RDS(on)150mΩ
Operating Temperature-40℃~+125℃
Peak Output Current(Sink)-
Report an ErrorShow similar products (0) >

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging250
Sales UnitPiece

Introduction

AI Translation

The TPS2660x devices are a family of feature-rich, compact, high-voltage eFuses with a comprehensive set of protection features. The wide supply input range of 4.2V to 55V enables control across many commonly used DC bus voltages. The devices can withstand and protect loads powered by positive and negative supplies up to ±60V. The integrated back-to-back FETs provide reverse current blocking, making the devices well suited for systems that require output voltage hold-up during power failures and undervoltage conditions. The devices also offer numerous adjustable features for load, supply, and device protection, including overcurrent protection, output slew rate control, overvoltage protection, and undervoltage protection. The robust internal protection control block and high voltage rating of the TPS2660x help simplify system design for surge protection.

The shutdown pin allows external control of the internal FET enable/disable function and can place the device into a low-current shutdown mode. To support system status monitoring and downstream load control, the devices provide fault and precision current monitor outputs. The MODE pin enables flexible device configuration among three current-limiting fault responses: circuit breaker mode, latch mode, and auto-retry mode.

The devices are available in a 5mm×4.4mm, 16-pin HTSSOP package and a 5mm×4mm, 24-pin VQFN package, rated for a temperature range of -40°C to +125°C.

Features

AI Translation
  • 4.2V to 55V operating voltage, 60V ABSmax integrated reverse input polarity protection down to –60V, no additional components required
  • Integrated back-to-back MOSFETs with total RON of 150mΩ
  • 0.1A to 2.23A adjustable current limit (±5% accuracy at 1A)
  • Load protection during surges with minimal external components (IEC61000-4-5)
  • IMON current monitor output (±8.5% accuracy)
  • Low quiescent current: 300μA active, 20μA shutdown
  • Adjustable UVLO, OVP cutoff, output slew rate control
  • Reverse current blocking
  • 38V fixed overvoltage clamp (TPS26602 only)
  • 16-pin HTSSOP and 24-pin VQFN packages
  • Selectable current-limit fault response (auto-retry, latch-off, and circuit breaker modes)
  • UL 2367 certified, file number 169910
  • R|LM ≥ 5.36kΩ (maximum current 2.35A)
  • UL60950 — safe during single-fault testing, open/short ILIM detection

Applications

AI Translation
  • Programmable Logic Controller
  • Distributed Control System (DCS)
  • Control & Automation Redundant Power Supply ORing
  • Industrial Surge Protection