Zbit Semi ZB25VQ32BTIG

The ZB25VQ32 of non-volatile flash memory device supports the standard Serial Peripheral Interface (SPI). Traditional SPI single bit serial input and output (Single I/O or SIO) is supported as well as optional two bit (Dual I/O or DIO) and four bit (quad

• Low power supply operation - Single 2.3V - 3.6V supply
• 32 M-bit/4M-byte/16,384 pages 256 bytes per programmable page - Uniform 4K-byte Sectors, 32K/64K-byte Blocks
• Standard SPI: CLK, CS#, DI, DO, WP#, HOLD# / RESET#
• Dual SPI: CLK, CS#, DI, DO, WP#, HOLD# / RESET#
• Quad SPI: CLK, CS#, IO0, IO1, IO2, IO3
• QPI: CLK, CS#, IO0, IO1, IO2, IO3
• Software & Hardware Reset
• Auto-increment Read capability
• Industrial (-40℃ to +85℃) Extended (-20℃ to +85℃)
• Low power consumption - 9 mA typical active current - 0.1 uA typical power down current
• Efficient “Continuous Read” and QPI Mode - Continuous Read with 8/16/32/64-Byte Wrap - As few as 8 clocks to address memory - Quad Peripheral Interface(QPI) reduces instruction overhead
• Flexible Architecture with 4KB sectors Sector Erase (4K-bytes) Block Erase (32K/64K-bytes) Page Program up to 256 bytes More than 100K erase/program cycles More than 20-year data retention
• Software and Hardware Write-Protect
• Power Supply Lock-Down and OTP protection
• Top/Bottom, Complement array protection
• 64-Bit Unique ID for each device
• Discoverable parameters(SFDP) register
• 3X256-Bytes Security Registers with OTP locks
• Volatile & Non-volatile Status Register Bits
• High performance program/erase speed Page program time: 350us typical Sector erase time: 30ms typical Block erase time: 200ms typical Chip erase time: 12s typical
• Package Options SOP8 - 150mil/208mil DFN8 (430.55mm) TFBGA24 All Pb-free packages are RoHS compliant