NXP MIMXRT1011DAE5A

The i.MX RT1010 is a member of i.MX RT real-time processor family based on the Arm Cortex -M7 core, which operates at speeds up to 400 MHz to provide high CPU performance and best real-time response. The i.MX RT1010 processor has 128 KB on-chip RAM, which can be flexibly configured as TCM or general-purpose on-chip RAM. The i.MX RT1010 integrates advanced power management module with DCDC and LDO that reduces complexity of external power supply and simplifies power sequencing. The i.MX RT1010 also provides various memory interfaces, including Quad SPI, and a wide range of connectivity interfaces, including UART, SPI, I2C, and USB; for connecting peripherals including WLAN, Bluetooth, and GPS. The i.MX RT1010 also has rich audio features, including SPDIF and I2S audio interface. Various analog IP integration, including ADC, temperature sensor, and etc.

• Supports single Arm Cortex -M7 with:
  • 16 KB L1 Instruction Cache
  • 8 KB L1 Data Cache
  • Full featured Floating Point Unit (FPU) with support of the VFPv5 architecture
• Support the Armv7 - M Thumb instruction set, defined in the ARM v7 - M architecture
• Integrated MPU, up to 16 individual protection regions
• Up to 128 KB I - TCM and D - TCM in total
• Up to 500 MHz frequency
• Cortex M7 CoreSight components integration for debug
• Boot ROM (64 KB)
• On - chip RAM (128 KB) Configurable RAM size up to 128 KB shared with CM7 TCM
• External memory interfaces:
  • SPI NOR FLASH
  • Single/Dual channel Quad SPI FLASH with XIP support and on - the - fly decryption Octal flash
• Timers and PWMs:
  • Two General Programmable Timers (GPT) 4 - channel generic 32 - bit resolution timer for each, Each support standard capture and compare operation
  • Periodical Interrupt Timer (PIT) – Generic 32 - bit resolution timer, Periodical interrupt generation
  • FlexPWM – Up to 4 submodules, 16 - bit resolution PWM suitable for Motor Control applications
• Audio:
  • SPDIF input and output
  • Two synchronous audio interface (SAI) modules, which support I2S, AC97, TDM, and codec/DSP interfaces
  • MQS interface for medium quality audio via GPIO pads
• Connectivity:
  • One USB 2.0 OTG controller with integrated PHY interface
  • Four universal asynchronous receiver/transmitter (UART) modules
  • Two I2C modules
  • Two SPI modules
• GPIO and Pin Multiplexing:
  • General - purpose input/output (GPIO) modules with interrupt capability
  • Input/output multiplexing controller (IOMUXC) to provide centralized pad control
  • 44 GPIOs for 80 - pin LQFP package
  • FlexIO
• Full PMIC integration, including on - chip DCDC and LDOs
• Temperature sensor with programmable trim points
• GPC hardware power management controller
• Arm Cortex - M7 CoreSight debug and trace architecture
• Trace Port Interface Unit (TPIU) to support off - chip real - time trace
• Support for 5 - pin JTAG and SWD debug interfaces
• High Assurance Boot (HAB)
• Data Co - Processor (DCP): AES - 128, ECB, and CBC mode, SHA - 1 and SHA - 256, CRC - 32
• FlexSPI with On - The - Fly AES Decryption (OTFAD) AES - 128, CTR mode, On - the - fly QSPI Flash decryption
• True random number generation (TRNG)
• Secure Non - Volatile Storage (SNVS)
• Secure real - time clock (RTC)
• Zero Master Key (ZMK)
• Secure JTAG Controller (SJC)

• Motor Control
• Home Appliance IoT