TI TPS562231DRLR

TPS562231 is a simple, easy-to-use 2A synchronous buck converter in a SOT563 package. The device is optimized to minimize the external components required for operation and to achieve low standby current. These switch-mode power supply (SMPS) devices employ D-CAP3 mode control, which provides fast transient response while supporting both low equivalent series resistance (ESR) output capacitors such as high-polymer types and ultra-low ESR ceramic capacitors — without external compensation components. During light-load operation, the TPS562231 operates in pulse skip mode (PSM) to maintain high efficiency. The TPS562231 is available in a 6-pin 1.6mm × 1.6mm SOT563 (DRL) package and is rated for a junction temperature range of -40°C to 125°C.

• 2A converter integrating 95mΩ and 55mΩ FETs
• D-CAP3™ mode control for fast transient response
• Input voltage range: 4.5V to 17V
• Output voltage range: 0.6V to 7V
• Pulse skip mode
• 850kHz switching frequency
• Low shutdown current less than 2μA (typical)
• 2% feedback voltage accuracy (25°C)
• Start-up from pre-biased output voltage
• Cycle-by-cycle overcurrent limiting
• Discontinuous mode overcurrent protection
• Non-latching UVP and TSD protection
• 6-pin SOT563 package
• Precision enable pin
• Pin-to-pin compatible with TPS563231

• Standard 12V power rail
• Digital TV power supply
• Embedded systems
• Home network terminal equipment
• Digital set-top box (STB)
• Surveillance
• Smart meters