MAXIM MAX30003CWV+T

The MAX30003 is a complete, biopotential, analog frontend solution for wearable applications. It offers high performance for clinical and fitness applications, with ultra-low power for long battery life. The MAX30003 is a single biopotential channel providing ECG waveforms and heart rate detection. The biopotential channel has ESD protection, EMI filtering, internal lead biasing, DC leads-off detection, ultra-low power leads-on detection during standby mode, and extensive calibration voltages for built-in self-test. Soft power-up sequencing ensures no large transients are injected into the electrodes. The biopotential channel also has high input impedance, low noise, high CMRR, programmable gain, various low-pass and high-pass filter options, and a high resolution analog-to-digital converter. The biopotential channel is DC coupled, can handle large electrode voltage offsets, and has a fast recovery mode to quickly recover from overdrive conditions, such as defibrillation and electrosurgery.

• Clinical-Grade ECG AFE with High-Resolution Data Converter
• 15.5 Bits Effective Resolution with 5μVPP Noise
• Better Dry Starts Due to Much Improved Real World CMRR and High Input Impedance
• Fully Differential Input Structure with CMRR > 100dB
• Offers Better Common-Mode to Differential Mode Conversion Due to High Input Impedance
• High Input Impedance >500MΩ for Extremely Low Common-to-Differential Mode Conversion
• Minimum Signal Attenuation at the Input During Dry Start Due to High Electrode Impedance
• High DC Offset Range of ±650mV (1.8V, typ) Allows to Be Used with Wide Variety of Electrodes
• High AC Dynamic Range of 65mVPP Will Help the AFE Not Saturate in the Presence of Motion/Direct Electrode Hits
• Longer Battery Life Compared to Competing Solutions
• 85μW at 1.1V Supply Voltage
• Leads-On Interrupt Feature Allows to Keep μV in Deep Sleep Mode with RTC Off Until Valid Lead Condition is Detected
• Lead-On Detect Current: 0.7μA (typ)
• Built-In Heart Rate Detection with Interrupt Feature Eliminates the Need to Run HR Algorithm on the μController
• Robust R-R Detection in High Motion Environment at Extremely Low Power
• Configurable Interrupts Allows the μΣ Wake-Up Only on Every Heart Beat Reducing the Overall System Power
• High Accuracy Allows for More Physiological Data Extractions
• 32-Word FIFO Allows You to Wake Up μController Every 256ms with Full ECG Acquisition
• High-Speed SPI Interface
• Shutdown Current of 0.5μA (typ)

• Single-Lead Event Monitors for Arrhythmia Detection
• Single-Lead Wireless Patches for At-Home/ In-Hospital Monitoring
• Chest Band Heart Rate Monitors for Fitness Applications
• Bio Authentication and ECG-On-Demand Applications