- Pinout Diagram
- Footprint Diagram
HTCSEMI HT8314ARTZ
| Manufacturer | HTCSEMIAsian Brands |
| MPN | HT8314ARTZ |
| LCSC Part # | C7431205 |
| Packaging | TSSOP20 |
| Customer # | |
| Key Attributes | Pressure sensor drive |
| Datasheet |  HTCSEMI HT8314ARTZ |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Sensor Evaluation Boards | |
| Manufacturer | HTCSEMI | |
| Packaging | TSSOP20 | |
| Voltage - Supply | 2.4V~5.2V | |
| Features | Low-power mode | |
| Length | 4.3mm | |
| Width | 4.3mm | |
| Current - Supply | 500uA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 5 |
| Multiple | 5 |
| Standard Packaging | 2500 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The HT8314 is high performance, very low power, front- end analog processor CMOS IC, includes operational amplifier, comparators, low battery detector, switched voltage source and charge/ discharge control circuitry. The HT8314 is designed specifically to drive a piezo- resistive pressure sensor and providing the analog architecture of dual- slope converting to operate from the control bus of a wide variety of microprocessor. The input stage consists of a high impedance buffer to achieve stable bias current with varying input voltage. A built- in low noise amplifier is used for achieving high level output from the buffer. In operation, the unknown amplified signal voltage is integrated during a certain time, then re- integrates to a known reference voltage and measures the amount of time required to bring the integration back to its original value. When charged by a constant current the voltage on the external capacitor is a linear function of time and can be used to connect the input voltage being measured to the time as determined by a digital counter.
Features
- Dual- Slope analog converting
- Low standby current: 0.5μA
- Low power operation - 0.9mW
- Low operating voltage: 2.4V ~ 5.2V
- Adjustable low- battery detector
| Qty | Unit Price | Total Amount |
|---|---|---|
| 5+ | $ 0.3633$ 0.1817 | $ 0.91 |
| 50+ | $ 0.2848$ 0.1424 | $ 7.12 |
| 150+ | $ 0.2511$ 0.1256 | $ 18.84 |
| 500+ | $ 0.225$ 0.1125 | $ 56.25 |
| 2,500+ | $ 0.2063$ 0.1032 | $ 258.00 |
| 5,000+ | $ 0.1951$ 0.0976 | $ 488.00 |
Standard Packaging2500/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Sensor Evaluation Boards | |
| Manufacturer | HTCSEMI | |
| Packaging | TSSOP20 | |
| Voltage - Supply | 2.4V~5.2V | |
| Features | Low-power mode | |
| Length | 4.3mm | |
| Width | 4.3mm | |
| Current - Supply | 500uA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 5 |
| Multiple | 5 |
| Standard Packaging | 2500 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The HT8314 is high performance, very low power, front- end analog processor CMOS IC, includes operational amplifier, comparators, low battery detector, switched voltage source and charge/ discharge control circuitry. The HT8314 is designed specifically to drive a piezo- resistive pressure sensor and providing the analog architecture of dual- slope converting to operate from the control bus of a wide variety of microprocessor. The input stage consists of a high impedance buffer to achieve stable bias current with varying input voltage. A built- in low noise amplifier is used for achieving high level output from the buffer. In operation, the unknown amplified signal voltage is integrated during a certain time, then re- integrates to a known reference voltage and measures the amount of time required to bring the integration back to its original value. When charged by a constant current the voltage on the external capacitor is a linear function of time and can be used to connect the input voltage being measured to the time as determined by a digital counter.
Features
- Dual- Slope analog converting
- Low standby current: 0.5μA
- Low power operation - 0.9mW
- Low operating voltage: 2.4V ~ 5.2V
- Adjustable low- battery detector
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | 8542391000 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | 8542391000 |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |