Radiocrafts AS RC2500-TM

The RC11XX(HP) / RC25XX(HP) / RC17xx(HP)-TM RF Transceiver Modules are compact surface-mounted high performance modules for wireless mesh networking applications. The modules feature a fully embedded Tinymesh application and multi-hop protocol stack with automatic network forming and self-healing features. The embedded Tinymesh application layer supports a full duplex UART, Analogue- Pulse- and Digital inputs, as well as PWM and Digital outputs. Serial application data entered on the UART port is transported automatically to the desired destination node without further interaction from any external processor. The modules are completely shielded, available as Low Power, High Power and Long Range Ultra Narrow Band versions, and pre-certified for operation in license free bands from 169 MHz to 2.4 GHz.

• Embedded application layer for I/O control and data collection
• Self-forming, self-healing and self-optimizing bi-directional mesh network stack
• AES 128 encryption
• Selectable Gateway, Router and low power End Device configuration
• Configurable digital I/O, PWM (Dimmer) output and analogue inputs
• Full Duplex Serial Port with handshake, streaming support and 256-byte buffer for easy RS232/422/485 wire replacement and MODBUS RTU compatibility
• Pulse counter with configurable de-bounce time and detection feedback output
• 'Walk-by' mode for low power data logging and metering applications
• RSSI and Network connect LED output control for simplified field installation
• Group-, Broadcast- or Individual addressing modes
• Clustered Node Detection and Network Congestion Avoidance (CND/NCA)
• RF Jamming Detection and Alarm, with alarm output and network alarm messaging
• Analogue- and Digital level triggered event messages.
• Time-generated and event-triggered status messages
• Locator Function for asset tracking applications
• Network Busy Detection for ad hoc networks with multiple, roaming Gateway Devices
• Multiple Gateway support for redundancy and automatic network load sharing
• Small size (12.7x25.4x3.7 mm), shielded and optimized for SMD mounting
• No external components
• Wide supply voltage range
• RC1x40/80(HP)-TM conforms with EU RED directive (EN 300 220, EN 301 489, EN 60950)
• RC119x-TM conforms with regulations for operation under FCC CFR 47 part 15
• RC117x(HP)-TM complies with G.S.R.564(E) (G.S.R.168(E))
• RC2500(HP)-TM complies with EN 300 328 (Europe), FCC CFR 47 part 15 (US) and ARIB STD-T66 (Japan)
• RC117x-TM and RC117xHP-TM comply to IEEE 802.15.4.g PHY mode 0 encoding when configured for RF Data Rate 8.

• Wireless Sensor Networks
• Automatic Meter Reading
• Alarm- and Security Systems
• Building Management
• Telemetry Stations
• Fleet Management
• Asset Tracking
• Street Light Control and Monitoring