ADI LTC4263IDE#TRPBF

The LTC4263 is an autonomous single-channel PSE controller for use in IEEE 802.3af compliant Power over Ethernet systems. It includes an onboard power MOSFET, internal inrush, current limit, and short-circuit control, IEEE 802.3af compliant PD detection and classification circuitry, and selectable AC or DC disconnect sensing. Onboard control algorithms provide complete IEEE 802.3af compliant operation without the need of a microcontroller. The LTC4263 simplifies PSE implementation, needing only a single 48 supply and a small number of passive support components. Programmable onboard power management circuitry permits multiple LTC4263s to allocate and share power in multi-port systems, allowing maximum utilization of the 48 power supply—all without the intervention of a host processor. The port current limit can be configured to automatically adjust to the detected PD class. Detection backoff timing is configurable for either Endpoint or Midspan operation. Built-in foldback and thermal protection provide comprehensive fault protection. An LED pin indicates the state of the port controlled by the LTC4263. When run from a single 48 supply, the LED pin can operate as a simple switching current source to reduce power dissipation in the LED drive circuitry. The LTC4263 is available in 14-pin 4mm × 3mm DFN and 14-pin SO packages.

• IEEE 802.3af Compliant
• Operation from a Single 48V Supply
• Fully Autonomous Operation without Microcontroller
• Internal MOSFET with Thermal Protection
• Power Management Works Across Multiple Ports with Simple RC Network
• Precision Inrush Control with Internal Sense Resistor
• Powered Device (PD) Detection and Classification
• AC and DC Disconnect Sensing
• Robust Short-Circuit Protection
• Pin-Selectable Detection Backoff for Midspan PSEs
• Classification Dependent ICUT Current Threshold
• LED Driver Indicates Port On and Blinks Status Codes
• Available in 14-Pin SO and 4mm × 3mm DFN Packages

• IEEE 802.3af Compliant Endpoint/Midspan PSEs
• Single-Port or Multi-Port Power Injectors
• Power Forwarders
• Low-Port Count PSEs
• Environment B PSEs
• Standalone PSEs