- Pinout
- Footprint
QST QMC6310U
| Manufacturer | QSTAsian Brands |
| MPN | QMC6310U |
| LCSC Part # | C669299 |
| Packaging | LGA-8(1.2x1.2) |
| Customer # | |
| Key Attributes | 3-Axis Single Chip Magnetic Sensor |
| Datasheet |  QST QMC6310U |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Linear, Compass (ICs) | |
| Manufacturer | QST | |
| Packaging | LGA-8(1.2x1.2) | |
| Features | Built-in self-test (BIST);On-chip set/reset coil | |
| Current - Supply | 35uA | |
| Magnetic Sensing Range(X,Y) | ±3mT | |
| Operating Temperature | -40℃~+85℃ | |
| Output bit | 16bit | |
| Voltage - Supply | 2.5V~3.6V | |
| Magnetic Sensing Range(Z) | ±3mT | |
| Interface Type | I2C |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 3000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The QMC6310 is a three-axis magnetic sensor, which integrates magnetic sensors and signal condition ASIC into one silicon chip. This Land Grid Array package (LGA) is targeted for applications such as e-compass, map rotation, gaming and personal navigation in mobile and wearable devices. The QMC6310 is based on state-of-the-art, high resolution, magneto-resistive technology. Along with the custom-designed 16-bit ADC ASIC, it offers the advantages of low noise, high accuracy, low power consumption, offset cancellation and temperature compensations. QMC6310 enables 1° to 2° compass heading accuracy. The I²C serial bus allows for easy interface. The QMC6310 is in a 1.2x1.2x0.53mm³ surface mount 8-pin LGA package.
Features
- 3-Axis Magneto-Resistive Sensors in a 1.2x1.2x0.5 3mm³ LGA, Guaranteed to Operate Over an Extended Temperature Range of -40 ℃ to +85 ℃
- 16 Bit ADC With Low Noise AMR Sensors Achieves 2 milli-Gauss Field Resolution
- Wide Magnetic Field Range (±30 Gauss)
- Temperature Compensated Data Output
- I2C Interface with Standard and Fast Modes
- Small Size for Highly Integrated Products
- Signals Have Been Digitized and Calibrated
- Enables 1° To 2° Degree Compass Heading Accuracy
- Allows for Pedestrian Navigation and LBS Applications
- Maximizes Sensor’s Full Dynamic Range and Resolution
- Automatically Maintains Sensor’s Sensitivity Under Wide Operating Temperature Range
- High-Speed Interfaces for Fast Data Communications
- Maximum 1.5KHz Data Output Rate
- Enables Low-Cost Functionality Test After Assembly in Production
- Compatible with Battery Powered Applications
- RoHS Compliance
- Compassing Heading, Hard Iron, Soft Iron, and Auto Calibration Libraries Available
- Built-In Self-Test
- Wide Range Operation Voltage (2.5V to 3.6V) and Low Power Consumption (35μA)
- Software and Algorithm Support Available
Applications
- e-compass
- map rotation
- gaming
- personal navigation in mobile and wearable devices
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Linear, Compass (ICs) | |
| Manufacturer | QST | |
| Packaging | LGA-8(1.2x1.2) | |
| Features | Built-in self-test (BIST);On-chip set/reset coil | |
| Current - Supply | 35uA | |
| Magnetic Sensing Range(X,Y) | ±3mT | |
| Operating Temperature | -40℃~+85℃ | |
| Output bit | 16bit | |
| Voltage - Supply | 2.5V~3.6V | |
| Magnetic Sensing Range(Z) | ±3mT | |
| Interface Type | I2C |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 3000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The QMC6310 is a three-axis magnetic sensor, which integrates magnetic sensors and signal condition ASIC into one silicon chip. This Land Grid Array package (LGA) is targeted for applications such as e-compass, map rotation, gaming and personal navigation in mobile and wearable devices. The QMC6310 is based on state-of-the-art, high resolution, magneto-resistive technology. Along with the custom-designed 16-bit ADC ASIC, it offers the advantages of low noise, high accuracy, low power consumption, offset cancellation and temperature compensations. QMC6310 enables 1° to 2° compass heading accuracy. The I²C serial bus allows for easy interface. The QMC6310 is in a 1.2x1.2x0.53mm³ surface mount 8-pin LGA package.
Features
- 3-Axis Magneto-Resistive Sensors in a 1.2x1.2x0.5 3mm³ LGA, Guaranteed to Operate Over an Extended Temperature Range of -40 ℃ to +85 ℃
- 16 Bit ADC With Low Noise AMR Sensors Achieves 2 milli-Gauss Field Resolution
- Wide Magnetic Field Range (±30 Gauss)
- Temperature Compensated Data Output
- I2C Interface with Standard and Fast Modes
- Small Size for Highly Integrated Products
- Signals Have Been Digitized and Calibrated
- Enables 1° To 2° Degree Compass Heading Accuracy
- Allows for Pedestrian Navigation and LBS Applications
- Maximizes Sensor’s Full Dynamic Range and Resolution
- Automatically Maintains Sensor’s Sensitivity Under Wide Operating Temperature Range
- High-Speed Interfaces for Fast Data Communications
- Maximum 1.5KHz Data Output Rate
- Enables Low-Cost Functionality Test After Assembly in Production
- Compatible with Battery Powered Applications
- RoHS Compliance
- Compassing Heading, Hard Iron, Soft Iron, and Auto Calibration Libraries Available
- Built-In Self-Test
- Wide Range Operation Voltage (2.5V to 3.6V) and Low Power Consumption (35μA)
- Software and Algorithm Support Available
Applications
- e-compass
- map rotation
- gaming
- personal navigation in mobile and wearable devices
C669299 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |