LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
Seaward Elec SE9029X product image
  • SE9029X thumbnail 1
  • SE9029X thumbnail 2
  • SE9029X thumbnail 3
  • Pinout
  • Footprint
Images for reference only

Seaward Elec SE9029XRoHS

Manufacturer
Seaward ElecAsian Brands
MPN
SE9029X
LCSC Part #
C668227
Packaging
SOP-8-EP
Customer #
Key Attributes
2.5A Single-cell Lithium Battery Switching Mode Charging Management
Datasheetpdf iconSeaward Elec SE9029X
In-Stock: 2,087
2,087 In stock, ships now
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 0.3667$ 0.37
10+$ 0.3244$ 3.24
30+$ 0.3063$ 9.19
100+$ 0.2837$ 28.37
500+$ 0.2445$ 122.25
1,000+$ 0.2384$ 238.40
Standard Packaging2500/Full Reel
Better price for more quantity?
$

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Battery Management
ManufacturerSeaward Elec
PackagingSOP-8-EP
FeaturesConstant current charging;Constant voltage charging;Trickle charging;Automatic recharge;Charge termination;Programmable charging current;Reverse current blocking;Under-voltage lockout;Soft-start
Operating Temperature-20℃~+125℃
Quiescent Current110uA
0V Battery Charge-
Type of BatteryLithium Battery
Operating Voltage4.7V~5.5V
The Chip TypeCharging IC
Interface-
Balance Current-
Charge Current - Max1A
Report an ErrorShow similar products (0) >

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging2500
Sales UnitPiece

Introduction

AI Translation

SE9029X is a constant-current/constant-voltage lithium battery charge controller based on a current-mode PWM buck switching architecture. The charge current is set by a sense resistor connected externally between the SEN and BAT pins, and the float voltage for a single cell is internally set to 4.20V/4.35V (typical).

The charge cycle begins when the VIN input voltage exceeds the battery voltage by more than 100mV. At the start of the charge cycle, if the battery voltage is below the trickle charge threshold, the charger IC enters trickle charge mode, with the trickle charge current internally set to 1/10 of the full charge current. Once the battery voltage exceeds the trickle charge threshold, the charger enters full-current CC mode. In CC mode, the charge current is set by an external sense resistor R5 in conjunction with an internal 100mV reference voltage. As the battery voltage approaches the float voltage, the charge current begins to decrease. When the charge current drops to 1/10 of the full charge current, the charge cycle terminates; the internal comparator turns off the pull-down NMOSFET at the CHRG pin, leaving the CHRG pin in a high-impedance state. To restart the charge cycle, the input voltage can be removed and reapplied, or the charger can be disabled momentarily. Likewise, if the battery voltage falls below the recharge threshold voltage, a new charge cycle begins. Once the battery is fully charged, if the input voltage is not removed, the charger shuts down; when the input voltage is removed, the charger enters sleep mode, which greatly reduces battery current consumption and extends standby time.

Features

AI Translation
  • Single-cell Li-ion battery, CC/CV charging mode
  • Switching-mode operation for fast, efficient, and simple charging management
  • Three-stage charging management
  • Built-in reverse current protection, no external diode required
  • Integrated protections: undervoltage protection, chip over-temperature protection
  • Available in DFN3*3-8 and SOP8-EP packages
  • 1MHz (Typ) fixed switching frequency
  • MPPT charging efficiency up to 90%+
  • Charge voltage 4.2V/4.35V ±1%
  • Externally configurable charge current
  • Trickle charging
  • Automatic recharge
  • Sleep mode
  • Dual-LED charge status indication

Applications

AI Translation
  • Backup power supply
  • Portable devices
  • Li-ion battery charger
  • Handheld devices