LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
ADI LT1158IN#PBF product image
Images for reference only

ADI LT1158IN#PBFRoHS

Manufacturer
ADI
MPN
LT1158IN#PBF
LCSC Part #
C662898
Packaging
PDIP-16
Customer #
Key Attributes
5V~30V 500mA 500mA PDIP-16 Gate Drivers RoHS
Datasheetpdf iconADI LT1158IN#PBF
Out of Stock
Notify Me
Add to BOM List
QtyUnit Price(Reference Only)Total Amount
1+$ 7.0661$ 7.07
200+$ 2.7351$ 547.02
500+$ 2.6394$ 1319.70
1,000+$ 2.5915$ 2591.50
Standard Packaging25/Full Tube
Better price for more quantity?
$

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers
ManufacturerADI
PackagingPDIP-16
Input Logic Level - Low-
Low Level Delay Time-
High Level Delay Time-
Quiescent Current2.2mA
Input Logic Level - High-
Operating Temperature-40℃~+85℃
Voltage - Supply5V~30V
Driven ConfigurationHalf-Bridge
Current - Output Low(IOL)500mA
Rise Time130ns
Fall Time120ns
FeaturesOver Current Protection;Enable shutdown;Short Circuit Protection;Dead-time control;Over Voltage Protection;Interleaved conduction protection;Charge pump boost
Current - Output High(IOH)500mA
Load TypeMOSFET
Report an ErrorShow similar products (0) >

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging25
Sales UnitPiece

Introduction

AI Translation

A single input pin on the LT1158 synchronously controls two N-channel power MOSFETs in a totem pole configuration. Unique adaptive protection against shoot-through currents eliminates all matching requirements for the two MOSFETs. This greatly eases the design of high efficiency motor control and switching regulator systems. A continuous current limit loop in the LT1158 regulates short-circuit current in the top power MOSFET. Higher start-up currents are allowed as long as the MOSFET VDS does not exceed 1.2V. By returning the FAULT output to the enable input, the LT1158 will automatically shut down in the event of a fault and retry when an internal pull-up current has recharged the enable capacitor. An on-chip charge pump is switched in when needed to turn on the top N-channel MOSFET continuously. Special circuitry ensures that the top side gate drive is safely maintained in the transition between PWM and DC operation. The gate-to-source voltages are internally limited to 14.5V when operating at higher supply voltages.

Features

AI Translation
  • Drives Gate of Top Side MOSFET Above V+
  • Operates at Supply Voltages from 5V to 30V
  • 15ns Transition Times Driving 3000pF
  • Over 500mA Peak Driver Current
  • Adaptive Non-Overlap Gate Drives
  • Continuous Current Limit Protection
  • Auto Shutdown and Retry Capability
  • Internal Charge Pump for DC Operation
  • Built-In Gate Voltage Protection
  • Compatible with Current-Sensing MOSFETs
  • TTL/CMOS Input Levels
  • Fault Output Indication

Applications

AI Translation
  • PWM of High Current Inductive Loads
  • Half Bridge and Full Bridge Motor Control
  • Synchronous Step-Down Switching Regulators
  • Three-Phase Brushless Motor Drive
  • High Current Transducer Drivers
  • Battery-Operated Logic-Level MOSFETs