ADI ADF4113BRUZ-REEL

The ADF4110 family of frequency synthesizers can be used to implement local oscillators in the upconversion and downconversion sections of wireless receivers and transmitters. They consist of a low noise digital PFD (phase frequency detector), a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus prescaler (P/P + 1). The A (6-bit) and B (13-bit) counters, in conjunction with the dual-modulus prescaler (P/P + 1), implement an N divider (N = BP + A). In addition, the 14-bit reference counter (R counter) allows selectable REFIN frequencies at the PFD input. A complete phase-locked loop (PLL) can be implemented if the synthesizer is used with an external loop filter and voltage controlled oscillator (VCO). Control of all the on-chip registers is via a simple 3-wire interface. The devices operate with a power supply ranging from 2.7 V to 5.5 V and can be powered down when not in use.

• ADF4110: 550 MHz; ADF4111: 1.2 GHz; ADF4112: 3.0 GHz; ADF4113: 4.0 GHz
• 2.7 V to 5.5 V power supply
• Separate charge pump supply (V_P) allows extended tuning voltage in 3 V systems
• Programmable dual-modulus prescaler 8/9, 16/17, 32/33, 64/65
• Programmable charge pump currents
• Programmable antibacklash pulse width
• 3-wire serial interface
• Analog and digital lock detect
• Hardware and software power-down mode

• Base stations for wireless radio (GSM, PCS, DCS, CDMA, WCDMA)
• Wireless handsets (GSM, PCS, DCS, CDMA, WCDMA)
• Wireless LANS
• Communications test equipment
• CATV equipment