ADI AD5664RBRMZ-5REEL7

The AD5624R/AD5644R/AD5664R are low power, quad, 12-/14-/16-bit buffered voltage-out DACs. All devices operate from a single 2.7 V to 5.5 V supply and are guaranteed monotonic by design. The AD5624R/AD5644R/AD5664R have an on-chip reference. The AD56x4R-3 has a 1.25 V, 5 ppm/°C reference, giving a full-scale output range of 2.5 V; the AD56x4R-5 has a 2.5 V, 5 ppm/°C reference giving a full-scale output range of 5 V. The on-chip reference is off at power-up, allowing the use of an external reference; all devices can be operated from a single 2.7 V to 5.5 V supply. The internal reference is enabled via a software write. The part incorporates a power-on reset circuit that ensures the DAC output powers up to 0V and remains there until a valid write takes place. The part contains a per-channel power-down feature that reduces the current consumption of the device to 480 nA at 5 V and provides software-selectable output loads while in power-down mode. The low power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment. The AD5624R/AD5644R/AD5664R use a versatile 3-wire serial interface that operates at clock rates up to 50 MHz, and is compatible with standard SPI, QSPIrx, MICROWIRE, and DSP interface standards. The on-chip precision output amplifier enables rail-to-rail output swing.

• Low power, smallest pin-compatible, quad nanoDACs AD5664R: 16 bits AD5644R: 14 bits AD5624R: 12 bits
• User-selectable external or internal reference External reference default On-chip 1.25 V/2.5 V, 5 ppm/°C reference
• 10-lead MSOP; 10-lead, 3 mm×3 mm LFCSP_WD; and 12-ball, 1.665 mm×2.245 mm WLCSP
• 2.7 V to 5.5 V power supply
• Guaranteed monotonic by design
• Power-on reset to zero scale
• Per channel power-down
• Serial interface, up to 50 MHz

• Process controls
• Data acquisition systems
• Portable battery-powered instruments
• Digital gain and offset adjustment
• Programmable voltage and current sources
• Programmable attenuators