ADI AD5062BRJZ-1500RL7

The AD5062 is a low power, single 16-bit unbuffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply. The part offers a relative accuracy specification of ±1 LSB, and operation is guaranteed monotonic with a ±1 LSB DNL specification. The part uses a versatile 3-wire serial interface that operates at clock rates up to 30 MHz, and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards. The reference for the AD5062 is supplied from an external VREF pin. A reference buffer is also provided on-chip. The part incorporates a power-on reset circuit that ensures the DAC output powers up to zero scale or mid-scale and remains there until a valid write takes place to the device. The part contains a power-down feature that reduces the current consumption of the device to typically 300 nA at 5 V and provides software-selectable output loads while in power-down mode. The part is put into power-down mode over the serial interface. Total unadjusted error for the part is <0.8 mV. This part exhibits very low glitch on power-up.

• Single 16-bit DAC, 1 LSB INL
• Power-on reset to midscale or zero-scale
• Guaranteed monotonic by design
• 3 power-down functions
• Low power serial interface with Schmitt-triggered inputs
• Tiny 8-lead SOT-23 package, low power
• Fast settling time of 4 μs typically
• 2.7 V to 5.5 V power supply
• Low glitch on power-up
• Unbuffered voltage capable of driving 60 kΩ load
• SYNC interrupt facility

• Process control
• Data acquisition systems
• Portable battery-powered instruments
• Digital gain and offset adjustment
• Programmable voltage and current sources
• Programmable attenuators