MICROCHIP PIC12LF1840T39AT-I/ST
| Manufacturer | |
| MPN | PIC12LF1840T39AT-I/ST |
| LCSC Part # | C628289 |
| Packaging | TSSOP-14 |
| Customer # | |
| Key Attributes | High-performance RISC CPU, low-power consumption characteristics, RF transmission, analog characteristics, special microcontroller characteristics, peripheral characteristics |
| Datasheet |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | RF and Wireless/RF Transmitters | |
| Manufacturer | MICROCHIP | |
| Packaging | TSSOP-14 | |
| Data Rate | 100Kbps | |
| Output Power(Max) | 10dBm | |
| Features | Power-on reset function;Power-off reset function | |
| Voltage - Supply | 1.8V~3.6V | |
| Interface | I2C;SPI | |
| Sensitivity | - | |
| Frequency | 31kHz~32MHz;310MHz;433MHz;868MHz;915MHz | |
| Receive Current | - | |
| Current Of Transmitting | 15.67mA | |
| Operating Temperature | - |
Report an ErrorShow similar products (0) >
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 2500 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Features
AI Translation
- Only 49 Instructions to Learn: All single-cycle instructions except branches
- Operating Speed: DC – 32 MHz oscillator/clock input, DC – 125 ns instruction cycle
- Interrupt Capability with Automatic Context Saving
- 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset
- Direct, Indirect and Relative Addressing modes: Two full 16-bit File Select Registers (FSRs), FSRs can read program and data memory
- Precision 32 MHz Internal Oscillator Block: Factory calibrated to ± 1%, typical, Software selectable frequencies range of 31 kHz to 32 MHz
- 31 kHz Low-Power Internal Oscillator
- Four Crystal modes up to 32 MHz
- Three External Clock modes up to 32 MHz
- 4x Phase Lock Loop (PLL)
- Fail-Safe Clock Monitor: Allows for safe shutdown if peripheral clock stops
- Two-Speed Oscillator Start-up
- Reference Clock module: Programmable clock output frequency and duty-cycle
- 1.8V - 3.6V Operation
- Self-Reprogrammable under Software Control
- Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Programmable Brown-out Reset (BOR)
- Extended Watchdog Timer (WDT)
- In-Circuit Serial Programming (ICSP) via Two Pins
- In-Circuit Debug (ICD) via Two Pins
- Enhanced Low-Voltage Programming (LVP)
- Programmable Code Protection
- Power-Saving Sleep mode
- Standby Current: 30 nA @3.0V, typical, RF off; 530 nA @3.0V, typical, RF on
- Sleep Operating Current: 0.67 mA @ 8 MHz, 3.0V, RF off, typical; 9.67 mA @ 8 MHz, 3.0V, RF on at 0 dBm, typical; 15.67 mA @ 8 MHz, 3.0V, RF on at +10 dBm, typical
- Low-Power Watchdog Timer Current: 500 nA @3.0V, typical
- Fully Integrated Transmitter
- FSK Operation up to 100 kbps
- OOK Operation up to 10 kbps
- Frequency-Agile Operation in 310, 433, 868 and 915 MHz Bands
- +10 dBm or 0 dBm Configurable Output Power
- Analog-to-Digital Converter (ADC) module: 10-bit resolution, 4 channels, Conversion available during Sleep
- Analog Comparator module: One rail-to-rail analog comparator, Power mode control, Software controllable hysteresis
- Voltage Reference module: Fixed Voltage Reference (FVR) with 1.024V and 2.048V output levels, 5-bit rail-to-rail resistive DAC with positive and negative reference selection
- 5 I/O Pins and 1 Input-only Pin: High current sink/source 25 mA/25 mA, Programmable weak pull-ups, Programmable interrupt-on-change pins
- Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler
- Enhanced Timer1: 16-bit timer/counter with prescaler External Gate Input mode, Dedicated, low-power 32 kHz oscillator driver
- Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
- Enhanced CCP (ECCP) module: Software selectable time bases, Auto-shutdown and auto-restart, PWM steering
- Master Synchronous Serial Port (MSSP) with SPI and I2C with: 7-bit address masking, SMBus/PMBus compatibility
- Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module: RS-232, RS-485 and LIN compatible, Auto-Baud Detect
- Capacitive Sensing (CPS) module (mTouch): 4 input channels
- Data Signal Modulator module: Selectable modulator and carrier sources
- SR Latch: Multiple Set/Reset input options, Emulates 555 Timer applications
In-Stock: 13
13 In stock, ships now
Add to BOM List
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 1.5359 | $ 1.54 |
| 10+ | $ 1.5006 | $ 15.01 |
| 30+ | $ 1.476 | $ 44.28 |
| 100+ | $ 1.453 | $ 145.30 |
Standard Packaging2500/Full Reel | ||
Better price for more quantity?
$
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



