LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
MICROCHIP HV830LG-G product image
Images for reference only

MICROCHIP HV830LG-GRoHS

Manufacturer
MPN
HV830LG-G
LCSC Part #
C622899
Packaging
SOIC-8
Customer #
Key Attributes
High Voltage EL Lamp Driver IC
Datasheetpdf iconMICROCHIP HV830LG-G

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Lighting, Ballast Controllers
ManufacturerMICROCHIP
PackagingSOIC-8
Output Voltage200V
Features-
Frequency - Switching65kHz
Driver TypeEL Lamp Driver
Input Voltage2V~9.5V
Output Current-
Operating Temperature-25℃~+85℃

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging3300
Sales UnitPiece

Introduction

AI Translation

The Supertex HV830 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0 to 9.5V. The device uses a single inductor and a minimum number of passive components. The nominal regulated output voltage that is applied to the EL lamp is ±100V. The chip can be enabled by connecting the resistors on the RSW-Osc and REL-Osc pins to the VDD pin, and disabled when connected to GND. The HV830 has two internal oscillators, a switching MOSFET and a high-voltage EL lamp driver. The frequency of the switching converter MOSFET is set by an external resistor connected between the RSW-Osc and the VDD pins. The EL lamp driver frequency is set by an external resistor connected between the REL-Osc and the VDD pins. An external inductor is connected between the LX and VDD pins. A 0.01μF to 0.1μF capacitor is connected between the CS pin and the GND. The EL lamp is connected between the VA and VB pins. The switching MOSFET charges the external inductor and discharges it into the CS capacitor. The voltage at CS will start to increase. Once the voltage at CS reaches a nominal value of 100V, the switching MOSFET is turned OFF to conserve power. The output pins VA and VB are configured as an H-bridge and are switched in opposite states to achieve 200V peak-to-peak across the EL lamp.

Features

AI Translation
  • Processed with HVCMOS technology
  • 2.0 to 9.5V operating supply voltage
  • DC to AC conversion
  • 200V peak-to-peak typical output voltage
  • Large output load capability typically 50nF
  • Permits the use of high-resistance elastomeric lamp components
  • Adjustable output lamp frequency to control lamp color, lamp life, and power consumption
  • Adjustable converter frequency to eliminate harmonics and optimize power consumption
  • Enable/disable function
  • Low current draw under no load condition
  • Very low standby current - 30nA typical

Applications

AI Translation
  • Handheld personal computers
  • Electronic personal organizers
  • GPS units
  • Pagers
  • Cellular phones
  • Portable instrumentation
Out of Stock
Notify Me
Add to BOM List
QtyUnit Price(Reference Only)Total Amount
1+$ 3.8793$ 3.88
10+$ 3.7891$ 37.89
30+$ 3.73$ 111.90
100+$ 3.6709$ 367.09
Standard Packaging3300/Full Reel
Better price for more quantity?
$