LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
ADI TMP01ESZ product image
  • TMP01ESZ thumbnail 1
  • TMP01ESZ thumbnail 2
  • TMP01ESZ thumbnail 3
  • Pinout Diagram
  • Footprint Diagram
Images for reference only

ADI TMP01ESZRoHS

Manufacturer
MPN
TMP01ESZ
LCSC Part #
C581315
Packaging
SOIC-8
Customer #
Key Attributes
Low Power Programmable Temperature Controller
Datasheetpdf iconADI TMP01ESZ

Products Specifications

Show similar products (0) >
TypeDescription
CategorySensors, Transducers/Temperature Sensors/Thermostats - Solid State
ManufacturerADI
PackagingSOIC-8
Operating Temperature-
Voltage - Supply4.5V~13.2V
Low Temperature (Cold) DetectionSupport
Temperature Hysteresis Configuration-
Quiescent Current(Iq)500uA
TypeSemiconductor
Programmable Action Temperature Range-55℃~+125℃
FeaturesBuilt-in temperature sensor;Adjustable temperature threshold;Adjustable hysteresis temperature;Built-in load driver

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging98
Sales UnitPiece

Introduction

AI Translation

The TMP01 is a temperature sensor that generates a voltage output proportional to absolute temperature and a control signal from one of two outputs when the device is either above or below a specific temperature range. Both the high/low temperature trip points and hysteresis (overshoot) band are determined by user - selected external resistors. For high volume production, these resistors are available on board.

The TMP01 consists of a band gap voltage reference combined with a pair of matched comparators. The reference provides both a constant 2.5V output and a voltage proportional to absolute temperature (VPAT) which has a precise temperature coefficient of 5mV / K and is 1.49 V nominal at 25°C. The comparators compare VPAT with the externally set temperature trip points and generate an open - collector output signal when one of their respective thresholds has been exceeded.

Hysteresis is also programmed by the external resistor chain and is determined by the total current drawn out of the 2.5V reference. This current is mirrored and used to generate a hysteresis offset voltage of the appropriate polarity after a comparator has been tripped. The comparators are connected in parallel, which guarantees that there is no hysteresis overlap and eliminates erratic transitions between adjacent trip zones.

The TMP01 utilizes proprietary thin - film resistors in conjunction with production laser trimming to maintain a temperature accuracy of ±1°C (typical) over the rated temperature range, with excellent linearity. The open - collector outputs are capable of sinking 20 mA, enabling the TMP01 to drive control relays directly. Operating from a 5V supply, quiescent current is only 500 μA (max).

Features

AI Translation
    • 55°C to +125°C (- 67°F to +257°F) operation
  • ±1.0°C accuracy over temperature (typ)
  • Temperature - proportional voltage output
  • User - programmable temperature trip points
  • User - programmable hysteresis
  • 20 mA open - collector trip point outputs
  • TTL/CMOS compatible
  • Single - supply operation (4.5 V to 13.2 V)
  • PDIP, SOIC, and TO - 99 packages

Applications

AI Translation
  • Over/under temperature sensor and alarm
  • Board - level temperature sensing
  • Temperature controllers
  • Electronic thermostats
  • Thermal protection
  • HVAC systems
  • Industrial process control
  • Remote sensors
In-Stock: 5
5 In stock, ships now
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 48.487$ 48.49
Standard Packaging98/Full Tube
Better price for more quantity?
$