ADI ADL5387ACPZ-R7
| Manufacturer | |
| MPN | ADL5387ACPZ-R7 |
| LCSC Part # | C579155 |
| Packaging | QFN-24-EP(4x4) |
| Customer # | |
| Key Attributes | 30 MHz to 2 GHz Quadrature Demodulator |
| Datasheet |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | RF and Wireless/RF Demodulators | |
| Manufacturer | ADI | |
| Packaging | QFN-24-EP(4x4) | |
| Operating Temperature | -40℃~+85℃ | |
| Frequency Range | 30MHz~2GHz | |
| Features | - | |
| Noise Figure | 14.7dB | |
| P1dB | 13dBm | |
| IP3 | 32.8dBm | |
| Voltage - Supply | 4.75V~5.25V | |
| Modulation Type | Quadrature Modulation (IQ) | |
| Current - Supply | 180mA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 1500 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The ADL5387 is a broadband quadrature I/Q demodulator that covers an RF/IF input frequency range from 30 MHz to 2 GHz. With a noise figure (NF) of 13.2 dB, 1-dB compression point (IP1dB) of 12.7 dBm, and third-order intercept point (IIP3) of 32 dBm at 450 MHz, the ADL5387 demodulator offers outstanding dynamic range suitable for the demanding infrastructure direct-conversion requirements. The differential RF/IF inputs provide a well-behaved broadband input impedance of 50 Ω and are best driven from a 1:1 balun for optimum performance.
Ultrabroadband operation is achieved with a divide-by-2 method for local oscillator (LO) quadrature generation. Over a wide range of LO levels, excellent demodulation accuracy is achieved with amplitude and phase balances of approximately 0.05 dB and 0.4°, respectively. The demodulated in-phase (I) and quadrature (Q) differential outputs are fully buffered and provide a voltage conversion gain of greater than 4 dB. The buffered baseband outputs are capable of driving a 2 Vₚ₋ₚ differential signal into 200 Ω.
The fully balanced design minimizes effects from second-order distortion. The leakage from the LO port to the RF port is less than -70 dBc. Differential dc-offsets at the I and Q outputs are less than 10 mV. Both of these factors contribute to the excellent second-order intercept point (IIP2) specifications of greater than 60 dBm.
The ADL5387 operates off a single 4.75 V to 5.25 V supply. The supply current is adjustable with an external resistor from the BIAS pin to ground.
Features
- Operating RF frequency 30 MHz to 2 GHz
- LO input at 2 times t̂₁₀ 60 MHz to 4 GHz
- Input IP3: 31 dBm at 900 MHz
- Input IP2: 62 dBm at 900 MHz
- Input P1dB: 13 dBm at 900 MHz
- Noise figure (NF) 12.0 dB at 140 MHz 14.7 dB at 900 MHz
- Voltage conversion gain > 4 dB
- Quadrature demodulation accuracy Phase accuracy ~0.4° Amplitude balance ~0.05 dB
- Demodulation bandwidth ~240 MHz
- Baseband I/Q drive 2 Vₚ₋ₚ into 200 Ω
- Single 5 V supply
Applications
- QAM/QPSK RF/IF demodulators
- W-CDMA/CDMA/CDMA2000/GSM
- Microwave point-to-(multi)point radios
- Broadband wireless and WiMAX
- Broadband CATVs
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 18.0933 | $ 18.09 |
| 10+ | $ 17.2668 | $ 172.67 |
| 30+ | $ 15.8343 | $ 475.03 |
| 100+ | $ 14.5848 | $ 1458.48 |
Standard Packaging1500/Full Reel | ||
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 5A991B1 |
| CNHTS | 8517799000 |
| USHTS | 8517790000 |
| TARIC | 8517790000 |
| CAHTS | 8517790000 |
| BRHTS | 85177900 |
| INHTS | 85177990 |
| MXHTS | 8517.70.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 5A991B1 |
| CNHTS | 8517799000 |
| USHTS | 8517790000 |
| TARIC | 8517790000 |
| Type | Details |
|---|---|
| CAHTS | 8517790000 |
| BRHTS | 85177900 |
| INHTS | 85177990 |
| MXHTS | 8517.70.99 |

