ADI AD7665ASTZ
| Manufacturer | |
| MPN | AD7665ASTZ |
| LCSC Part # | C578458 |
| Packaging | LQFP-48(7x7) |
| Customer # | |
| Key Attributes | 16-Bit, kSPS CMOS ADC |
| Datasheet |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC) | |
| Manufacturer | ADI | |
| Packaging | LQFP-48(7x7) | |
| Operating Temperature | -40℃~+85℃ | |
| Clock/Oscillator | Built-in | |
| Features | Bipolar input | |
| Voltage Reference | External | |
| Interface | Parallel port;Serial port | |
| Resolution(Bits) | 16;570kHz | |
| S/N Ratio | 90dB | |
| Voltage - Supply | 5V | |
| Number of Channels | 1 | |
| ADC architecture | SAR | |
| Integral non - linearity | 2.5LSB |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 250 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The AD7665 is a 16-bit, 570 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5V power supply. It contains a high speed 16-bit sampling ADC, a resistor input scaler that allows various input ranges, an internal conversion clock, error correction circuits, and both serial and parallel system interface ports. The AD7665 is hardware factory-calibrated and is comprehensively tested to ensure such ac parameters as signal-to-noise ratio (SNR) and total harmonic distortion (THD), in addition to the more traditional dc parameters of gain, offset, and linearity. It features a very high sampling rate mode (Warp), a fast mode (Normal) for asynchronous conversion rate applications, and for low power applications, a reduced power mode (Impulse) where the power is scaled with the throughput.
Features
- Throughput: 570 kSPS (Warp Mode), 500 kSPS (Normal Mode)
- INL: ±2.5 LSB Max (±0.0038% of Full Scale)
- 16-Bit Resolution with No Missing Codes
- S/(N+D): 90 dB Typ @ 180 kHz
- THD: -100 dB Typ @ 180 kHz
- Analog Input Voltage Ranges: Bipolar: ±10V, ±5V, ±2.5V; Unipolar: 0V to 10V, 0V to 5V, 0V to 2.5V
- Both AC and DC Specifications
- No Pipeline Delay
- Parallel (8/16 Bits) and Serial 5V/3V Interface
- SPI/QSPI/MICROWIRE/DSP Compatible
- Single 5V Supply Operation
- Power Dissipation: 64 mW Typical, 15 μW @ 100 SPS
- Power-Down Mode: 7 μW Max
- Package: 48-Lead Quad Flatpack (LQFP)
- Package: 48-Lead Chip Scale (LFCSP)
- Pin-to-Pin Compatible Upgrade of the AD7664/AD7663
Applications
- Data Acquisition
- Communication
- Instrumentation
- Spectrum Analysis
- Medical Instruments
- Process Control
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 30.2684$ 28.4523 | $ 28.45 |
| 30+ | $ 28.8944$ 27.1608 | $ 814.82 |
Standard Packaging250/Full Tray | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC) | |
| Manufacturer | ADI | |
| Packaging | LQFP-48(7x7) | |
| Operating Temperature | -40℃~+85℃ | |
| Clock/Oscillator | Built-in | |
| Features | Bipolar input | |
| Voltage Reference | External | |
| Interface | Parallel port;Serial port | |
| Resolution(Bits) | 16;570kHz | |
| S/N Ratio | 90dB | |
| Voltage - Supply | 5V | |
| Number of Channels | 1 | |
| ADC architecture | SAR | |
| Integral non - linearity | 2.5LSB |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 250 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The AD7665 is a 16-bit, 570 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5V power supply. It contains a high speed 16-bit sampling ADC, a resistor input scaler that allows various input ranges, an internal conversion clock, error correction circuits, and both serial and parallel system interface ports. The AD7665 is hardware factory-calibrated and is comprehensively tested to ensure such ac parameters as signal-to-noise ratio (SNR) and total harmonic distortion (THD), in addition to the more traditional dc parameters of gain, offset, and linearity. It features a very high sampling rate mode (Warp), a fast mode (Normal) for asynchronous conversion rate applications, and for low power applications, a reduced power mode (Impulse) where the power is scaled with the throughput.
Features
- Throughput: 570 kSPS (Warp Mode), 500 kSPS (Normal Mode)
- INL: ±2.5 LSB Max (±0.0038% of Full Scale)
- 16-Bit Resolution with No Missing Codes
- S/(N+D): 90 dB Typ @ 180 kHz
- THD: -100 dB Typ @ 180 kHz
- Analog Input Voltage Ranges: Bipolar: ±10V, ±5V, ±2.5V; Unipolar: 0V to 10V, 0V to 5V, 0V to 2.5V
- Both AC and DC Specifications
- No Pipeline Delay
- Parallel (8/16 Bits) and Serial 5V/3V Interface
- SPI/QSPI/MICROWIRE/DSP Compatible
- Single 5V Supply Operation
- Power Dissipation: 64 mW Typical, 15 μW @ 100 SPS
- Power-Down Mode: 7 μW Max
- Package: 48-Lead Quad Flatpack (LQFP)
- Package: 48-Lead Chip Scale (LFCSP)
- Pin-to-Pin Compatible Upgrade of the AD7664/AD7663
Applications
- Data Acquisition
- Communication
- Instrumentation
- Spectrum Analysis
- Medical Instruments
- Process Control
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



