ESPRESSIF ESP32-C6-WROOM-1-N8

ESP32-C6-WROOM-1 and ESP32-C6-WROOM-1U are general-purpose Wi-Fi, IEEE 802.15.4, and Bluetooth LE modules with powerful performance and rich peripheral interfaces, suitable for smart home, industrial automation, healthcare, consumer electronics, and other applications. ESP32-C6-WROOM-1 features an on-board PCB antenna, while ESP32-C6-WROOM-1U connects to an external antenna via a connector. Both modules are equipped with up to 16 MB of external SPI flash. ESP32-C6-WROOM-1 and ESP32-C6-WROOM-1U are each available in two variants: an 85°C version and a 105°C version. The two variants differ only in maximum ambient temperature and flash model.

• Integrated ESP32-C6 chip, RISC-V 32-bit single-core processor, supporting clock frequencies up to 160MHz
• ROM: 320KB
• HP SRAM: 512KB
• LP SRAM: 16KB
• Operating in 2.4GHz band, 1TTR
• Operating channel center frequency range: 2412～2484MHz
• Supports IEEE802.11ax protocol
• 20MHz non-AP mode only
• MCS0
• MCS9
• Uplink and downlink OFDMA for multi-user concurrent transmission in high-density deployments
• Downlink MU-MIMO for enhanced network capacity
• Beamformee for improved signal quality
• CQI
• DCM for improved link reliability
• Spatial reuse for enhanced network capacity
• TWT for improved power-saving mechanism
• Fully compatible with IEEE802.11b/g/n protocols
• Supports 20MHz and 40MHz bandwidth
• Data rates up to 150Mbps
• WMM
• Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU)
• Immediate Block ACK
• Fragmentation and defragmentation
• TXOP
• Automatic beacon monitoring (hardware TSF)
• 4× virtual Wi-Fi interfaces
• Simultaneous support for infrastructure Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous mode
• 802.11mc FTM
• Bluetooth LE: Bluetooth 5.3 certified
• Bluetooth mesh
• High power mode (20 dBm)
• Data rates: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
• Advertising Extensions
• Multiple Advertisement Sets
• Channel Selection Algorithm #2
• LE Power Control
• Wi-Fi and Bluetooth coexistence with shared antenna
• Compatible with IEEE802.15.4-2015 protocol
• Operating in 2.4GHz band, supports OQPSK PHY
• Data rate: 250Kbps
• Supports Thread 1.3
• Supports Zigbee 3.0
• 40MHz integrated crystal oscillator
• SPI flash
• On-board PCB antenna (ESP32-C6-WROOM-1)
• External antenna via connector (ESP32-C6-WROOM-1U)
• Rich peripheral interfaces including GPIO, SPI, parallel IO, UART, I2C, I2S, RMT (TX/RX), pulse counter, LED PWM, USB Serial/JTAG controller, MCPWM, SDIO 2.0 slave controller, GDMA, TWAI controller, on-chip JTAG debugging, event task matrix, ADC, temperature sensor, general-purpose timers, watchdog timers, and more
• Operating/supply voltage: 3.0V~3.6V
• Operating temperature: 85°C variant: -40°C~85°C; 105°C variant: -40°C~105°C

• Smart Home
• Industrial Automation
• Healthcare
• Consumer Electronics
• Smart Agriculture