Tudi MAX3081CPA-TUDI

The MAX3081 high-speed transceiver is designed for RS-485/RS-422 communication, integrating one driver and one receiver. The device guarantees a logic-high output when the receiver inputs are open or shorted. This means that if all drivers on the terminated bus are disabled (high-impedance), the receiver output will be logic high. The MAX3081 features a reduced driver slew rate to minimize EMI and reduce signal reflections caused by improper cable termination, enabling error-free data transmission at up to 15kbps. These transceivers typically draw low supply current when idle or when the driver is disabled. All devices feature 1/8 unit load receiver input impedance, allowing up to 256 transceivers to be connected on a single bus. The MAX3081 is designed for full-duplex communication.

• Single supply voltage, 4.5V to 5.5V
• Receiver failsafe with open, shorted, or terminated inputs
• 1/8 unit load, supports up to 256 transceivers on the bus
• Robust ESD protection on RS-485 pins: ±15kV air discharge, ±8kV contact discharge, ±15kV HBM
• Controlled driver slew rate
• Hot-plug disturbance protection on control pins
• Driver short-circuit thermal shutdown, current limiting, and overload protection

• RS-422/RS-485 communication
• Level translators
• Transceivers for EMI-sensitive applications
• Industrial control LAN