DIODES AL8862SP-13

The DIODESTM AL8862 is a step-down DC/DC converter designed to drive LEDs with a constant current. The AL8862 operates with an input supply voltage from 5V to 60V and provides an externally-adjustable output current up to 1A. Series connection of the LEDs provides identical LED currents, resulting in uniform brightness and eliminating the need for ballast resistors. The AL8862 switches at frequencies up to 1MHz. This allows the use of smaller-sized external components, hence minimizing the PCB size. The AL8862 integrates the power switch and a high-side output current-sensing circuit. Maximum output current of the AL8862 is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin. The soft-start time can be adjusted using an external capacitor from the CTRL pin to ground. An input voltage of 0.3V or lower at CTRL pin will shut down the power switch.

• Wide Input Voltage Range: 5V to 60V
• Output Current up to 1A
• Internal 60V NDMOS Switch
• Typical 4% Output Current Accuracy
• Single Pin for On/Off and Brightness Control by DC Voltage or PWM Signal
• High-Efficiency (Up to 97%)
• LED Short-Circuit Protection
• Inherent Open-Circuit LED Protection
• Current-Sense Resistor Short-Circuit Protection Overtemperature Shutdown
• Up to 1MHz Switching Frequency
• SO-8EP and U-DFN3030-6 Packages Available in Green Molding Compound (No Br, Sb)
• Totally Lead-Free & Fully RoHS Compliant
• Halogen- and Antimony-Free. “Green” Device
• An Automotive-Compliant Part is Available Under Separate Datasheet (AL8862Q)

• Commercial & industrial lightings
• Appliances interior lightings
• Architecture detail lightings
• External drivers with multiple channels and smart lightings