NXP FXLS93230AESR2

The FXLS9xxx0 is a single channel DSI3, PSI5, SPI, and ρC compatible lateral (X-axis or Y-axis) or vertical (Z-axis) inertial sensor.

• X-axis, Y-axis, or Z-axis – Medium g ranges from ±15.5 g to ±150 g nominal full-scale range – High g ranges from ±50 g to ±500 g nominal full-scale range
• -40 ℃ to 125 ℃ operating temperature range
• DSI3 compatible – Discovery mode for physical location identification – High side bus switch output driver – Command and response mode support for device configuration – Periodic data collection mode support for sensor data transfers. – Background diagnostic mode support during periodic data collection mode
• PSI5 Version 2.1 compatible – Compatible modes: – P10P-500/3L – P10P-500/4H – A10P-228/1L – P10CRC-xxx/xx – P16CRC-xxx/xx and many others – Programmable time slots with 1 µs resolution – Selectable baud rate: 125 kBd or 189 kBd – 10- and 16-bit data options – Selectable error detection: even parity, or 3-bit CRC – Optional daisy chain with external low side switch – Two-wire programming mode
• 32-bit SPI compatible serial interface – 3.3 V or 5 V single supply operation – Register read and write commands – Sensor data transmission commands – 12-bit data, left justified in a 16-bit data field – Command echo with 3-bit source identification – 2-bit basic status and 2-bit detailed status fields – 8-bit CRC
• I²C compatible serial interface (UM10204[1]) – Slave mode operation – Standard mode, fast mode, and fast mode plus support
• Programmable arming function
• DSP – Up to a fourth order low-pass filter with rolloff frequency options from 12.5 Hz to 1500 Hz – Optional single pole high pass filter with fast startup and output rate
• Limiting – Optional moving average – Optional 16 to 1 output interpolation
• Pb-free 16-Pin QFN 4 mm x 4 mm x 1.45 mm package

• Automotive
  • Airbag, Collision/Crash detection
  • Active suspension vibration monitoring
• Industrial
  • Machine condition monitoring