DIODES AH3572-SA-7

The AH3572 is a high voltage high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position and level sensing in consumer home appliances, office equipment, smart home to industrial applications. To support wide range of demanding applications, the design has been optimized to operate over the supply range of 3.0V to 28V. With chopper stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3572 provides a reliable solution over the whole operating range. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply. The output has an over current limit and a Zener clamp... The single open drain output can be switched on with South or North pole of sufficient strength. When the magnetic flux density (B) perpendicular to the package is larger than the operate point (B_OP) the output is switched on (pulled low) and is held on until magnetic flux density B is lower than the release point (B_RP).

• Omnipolar Operation
• High Sensitivity: B_OP and B_RP of +20G and +10G Typical
• Single Open Drain Output with Over Current Limit
• 3.0V to 28V Operating Voltage Range
• Chopper Stabilized Design Provides
  • Superior Temperature Stability
  • Minimal Switch Point Drift
  • Enhanced Immunity to Stress
• Good RF Noise Immunity
• Reverse Blocking Diode
• Zener Clamp on Supply and Output Pins
• -40°C to +125°C Operating Temperature
• ESD: HBM > 6kV
• Industry Standard SOT23 and SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) Packages
• Totally Lead-Free & Fully RoHS Compliant
• Halogen and Antimony Free. "Green" Device

• Position and Proximity Sensing in Consumer Home Appliances, Building Automation, Office Equipments and Industrial Applications
• Open and Close Detect
• Position Detect
• Level Detect
• Flow Meters
• Contact-Less Switches