- Pinout Diagram
- Footprint Diagram
onsemi FXL6408UMX
| Manufacturer | |
| MPN | FXL6408UMX |
| LCSC Part # | C457770 |
| Packaging | UQFN-16(1.8x2.6) |
| Customer # | |
| Key Attributes | Fully Configurable 8-Bit I²C-Controlled GPIO Expander |
| Datasheet |  onsemi FXL6408UMX |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/I/O Expanders | |
| Manufacturer | onsemi | |
| Packaging | UQFN-16(1.8x2.6) | |
| Operating Temperature | -40℃~+85℃ | |
| Interrupt Output | Interrupt Output | |
| Output Type | Open-drain | |
| Number of I/O | 8 | |
| Features | Reset function;IO level configurable;Cascade and address expansion | |
| Voltage - Supply | 1.65V~3.6V | |
| Quiescent Supply Current | 1.5uA | |
| Current - Output High(IOH) | 6mA | |
| Interface | I2C |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 5000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The FXL6408 is an 8-bit I²C - controlled GPIO expander. When configured in Input Mode, the FXL6408 monitors the input ports for data transitions and signals the baseband by asserting the /INT pin. The input default values can be programmed independently, allowing customized input detection. All inputs can be configured with pull - up or pull - down resistors to pre - bias the inputs in open - drain or non - driven applications. When configured in Output Mode, the GPIO pins are capable of delivering 6mA output drive according to the I²C register set. The FXL6408 is designed to allow voltage translation from levels as low as 1.65V and up to 4.0V. The FXL6408 features an active LOW RESET input as well as Power - On Reset (POR) circuit and I²C software reset options.
Features
- 4X Expansion of Connected Processor I/O Ports
- Fully Integrated I²C Slave
- 8 Independently Configurable I/O Ports
- Low - Power Quiescent Current: 1.5μA
- Voltage Translation Capable from 1.65V I²C Port Up to 4.0V GPIO Pins
- Selectable Device Address
- 6mA Output Drive
- Interrupt Pin to Alert Processor of Status Changes
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 0.615 | $ 0.62 |
| 10+ | $ 0.4923 | $ 4.92 |
| 30+ | $ 0.431 | $ 12.93 |
| 100+ | $ 0.3697 | $ 36.97 |
| 500+ | $ 0.3326 | $ 166.30 |
| 1,000+ | $ 0.3132 | $ 313.20 |
Standard Packaging5000/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/I/O Expanders | |
| Manufacturer | onsemi | |
| Packaging | UQFN-16(1.8x2.6) | |
| Operating Temperature | -40℃~+85℃ | |
| Interrupt Output | Interrupt Output | |
| Output Type | Open-drain | |
| Number of I/O | 8 | |
| Features | Reset function;IO level configurable;Cascade and address expansion | |
| Voltage - Supply | 1.65V~3.6V | |
| Quiescent Supply Current | 1.5uA | |
| Current - Output High(IOH) | 6mA | |
| Interface | I2C |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 5000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The FXL6408 is an 8-bit I²C - controlled GPIO expander. When configured in Input Mode, the FXL6408 monitors the input ports for data transitions and signals the baseband by asserting the /INT pin. The input default values can be programmed independently, allowing customized input detection. All inputs can be configured with pull - up or pull - down resistors to pre - bias the inputs in open - drain or non - driven applications. When configured in Output Mode, the GPIO pins are capable of delivering 6mA output drive according to the I²C register set. The FXL6408 is designed to allow voltage translation from levels as low as 1.65V and up to 4.0V. The FXL6408 features an active LOW RESET input as well as Power - On Reset (POR) circuit and I²C software reset options.
Features
- 4X Expansion of Connected Processor I/O Ports
- Fully Integrated I²C Slave
- 8 Independently Configurable I/O Ports
- Low - Power Quiescent Current: 1.5μA
- Voltage Translation Capable from 1.65V I²C Port Up to 4.0V GPIO Pins
- Selectable Device Address
- 6mA Output Drive
- Interrupt Pin to Alert Processor of Status Changes
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |