TI TMP275AIDR

The TMP275 is a ±0.5℃ accurate integrated digital temperature sensor with a 12-bit analog-to-digital converter (ADC) that can operate as low as 2.7-V supply voltage and is pin- and register-compatible with the Texas Instruments LM75, TMP75, TMP75B, and TMP175 devices. This device is available in SOIC-8 and VSSOP-8 packages, and it requires no external components to sense the temperature. The TMP275 is capable of reading temperatures with a maximum resolution of 0.0625℃ (12 bits) and as low as 0.5℃ (9 bits), which allows the user to maximize efficiency by programming for higher resolution or faster conversion time. The device is specified over a temperature range of -40℃ to 125℃. The TMP275 device features SMBus and two-wire interface compatibility, and allows up to eight devices on the same bus with the SMBus overtemperature alert function. The factory-calibrated temperature accuracy and the noise-immune digital interface make the TMP275 the preferred solution for temperature compensation of other sensors and electronic components, without the need for additional system-level calibration or elaborate board layout for distributed temperature sensing.

• High Accuracy: – ±0.5℃ (Maximum) From -20℃ to 100℃ ±1℃ (Maximum) From -40℃ to 125℃
• Low Quiescent Current: – 50 μA (Typical), 0.1-μA Standby
• Resolution: 9 to 12 Bits, User-Selectable
• Digital Output: SMBus, Two-Wire, and I²C Interface Compatibility
• 8 I²C/SMBus Addresses
• Wide Supply Range: 2.7 V to 5.5 V
• Small VSSOP-8 and SOIC-8 Packages
• No Specified Power-up Sequence Required; Two-Wire Bus Pullups May Be Enabled Before V+

• Power-Supply Temperature Monitoring
• Computer Peripheral Thermal Protection
• Battery Management
• Office Machines
• Servers
• Thermostat Controls
• Environmental Monitoring and HVAC
• Electromechanical Device Temperature
• Data Logger