- Pinout Diagram
- Footprint Diagram
onsemi FNA41560T2
| Manufacturer | |
| MPN | FNA41560T2 |
| LCSC Part # | C411214 |
| Packaging | SPM-AB-C26 |
| Customer # | |
| Key Attributes | 13.5V~16.5V 20kHz 600V 15A IGBT SPM-AB-C26 Power Driver Modules RoHS |
| Datasheet |  onsemi FNA41560T2 |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Discrete Semiconductors/Power Driver Modules | |
| Manufacturer | onsemi | |
| Packaging | SPM-AB-C26 | |
| Width | - | |
| Length | - | |
| Voltage - Supply | 13.5V~16.5V | |
| Quiescent Current(Iq) | 100uA;2.65mA | |
| Pd - Power Dissipation | 38W | |
| High-side Bias Voltage(Vbs) | 13V~18.5V | |
| Voltage - Isolation | 2000Vrms | |
| Frequency - Switching | 20kHz | |
| Drain to Source Voltage | 600V | |
| Current - Continuous Drain(Id) | 15A | |
| Operating Temperature - | -40℃~+150℃ | |
| RDS(on) | - | |
| Features | Undervoltage lockout with hysteresis;Overcurrent Protection;Short-Circuit Protection;Thermal Protection | |
| Configuration | Three-phase bridge | |
| Type | IGBT |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 12 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
FNA41560T2 is a Motion SPM 45 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.
Features
- UL Certified No. E209204 (UL1557)
- 600 V - 15 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection
- Low Thermal Resistance Using Ceramic Substrate
- Low-Loss, Short-Circuit Rated IGBTs
- Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout
- Built-In NTC Thermistor for Temperature Monitoring
- Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
- Single-Grounded Power Supply
- Isolation Rating: 2000 Vrms / min.
Applications
- Motion Control - Home Appliance / Industrial Motor
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 9.5431 | $ 9.54 |
| 10+ | $ 9.2862 | $ 92.86 |
Standard Packaging12/Full Tube | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Discrete Semiconductors/Power Driver Modules | |
| Manufacturer | onsemi | |
| Packaging | SPM-AB-C26 | |
| Width | - | |
| Length | - | |
| Voltage - Supply | 13.5V~16.5V | |
| Quiescent Current(Iq) | 100uA;2.65mA | |
| Pd - Power Dissipation | 38W | |
| High-side Bias Voltage(Vbs) | 13V~18.5V | |
| Voltage - Isolation | 2000Vrms | |
| Frequency - Switching | 20kHz | |
| Drain to Source Voltage | 600V | |
| Current - Continuous Drain(Id) | 15A | |
| Operating Temperature - | -40℃~+150℃ | |
| RDS(on) | - | |
| Features | Undervoltage lockout with hysteresis;Overcurrent Protection;Short-Circuit Protection;Thermal Protection | |
| Configuration | Three-phase bridge | |
| Type | IGBT |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 12 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
FNA41560T2 is a Motion SPM 45 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.
Features
- UL Certified No. E209204 (UL1557)
- 600 V - 15 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection
- Low Thermal Resistance Using Ceramic Substrate
- Low-Loss, Short-Circuit Rated IGBTs
- Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout
- Built-In NTC Thermistor for Temperature Monitoring
- Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
- Single-Grounded Power Supply
- Isolation Rating: 2000 Vrms / min.
Applications
- Motion Control - Home Appliance / Industrial Motor
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |