- Pinout
- Footprint
MEMSIC MMC5983MA
| Manufacturer | |
| MPN | MMC5983MA |
| LCSC Part # | C404329 |
| Packaging | LGA-16(3x3) |
| Customer # | |
| Key Attributes | ±8 Gauss, High Performance 3-axis Magnetic Sensor |
| Datasheet |  MEMSIC MMC5983MA |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Linear, Compass (ICs) | |
| Manufacturer | MEMSIC | |
| Packaging | LGA-16(3x3) | |
| Current - Supply | 450uA | |
| Magnetic Sensing Range(X,Y) | ±8Gs | |
| Operating Temperature | -40℃~+105℃ | |
| Output bit | 18bit | |
| Voltage - Supply | 2.8V~3.6V | |
| Magnetic Sensing Range(Z) | ±8Gs | |
| Interface Type | I2C;SPI |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 5000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The MMC5983MA is an AEC-Q100 qualified complete 3-axis magnetic sensor with on-chip signal processing and integrated I2C/SPI bus suitable for use in automotive applications. The device can be connected directly to a microprocessor, eliminating the need for A/D converters or timing resources.
It can measure magnetic fields within the full scale range of ±8 Gauss (G), with 0.25mG/0.0625mG per LSB resolution at 16bits/18bits operation mode and 0.4 mG total RMS noise level, enabling heading accuracy of ±0.5° in electronic compass applications.
An integrated SET/RESET function provides for the elimination of error due to Null Field output change with temperature. Temperature information from the integrated temperature sensor is available over the I2C Interface. The SET/RESET function can be performed for each measurement, periodically, or when the temperature changes by a predetermined amount as the specific application requires.
In addition, the SET/RESET function clears the sensors of any residual magnetic polarization resulting from exposure to strong external magnets.
The MMC5983MA is packaged in a low profile LGA package and an operating temperature range from -40℃ to +105℃.
The MMC5983MA provides an I2C digital output with 400 KHz, fast mode operation, and a 10MHz SPI digital output.
Features
- Fully integrated 3-axis magnetic sensor and electronic circuits requiring fewer external components
- Superior dynamic range and accuracy:
- ±8G FSR
- 18bits operation
- 0.4mG total RMS noise
- Enables heading accuracy of ±0.5°
- Max output data rate of 1000Hz
- Industrial standard low profile package 3.0mm x 3.0mm x 1.0mm
- Degaussing with built-in SET/RESET function
- Eliminates thermal variation induced offset error (Null field output)
- Clears the residual magnetization resulting from strong external fields
- On-chip sensitivity compensation
- On-chip temperature sensor
- Data_Ready Interrupt
- Low power consumption
- 1μA power down current
- I2C Slave, FAST(≤400KHz) mode
- 3.0V single low power supply
- SPI interface available
- RoHS compliant
Applications
- Electronic Compass & Navigation
- Position Sensing
- General Purpose Magnetic Field Measurements
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 2.2672 | $ 2.27 |
| 10+ | $ 1.9494 | $ 19.49 |
| 30+ | $ 1.7505 | $ 52.52 |
| 100+ | $ 1.5468 | $ 154.68 |
| 500+ | $ 1.4327 | $ 716.35 |
| 1,000+ | $ 1.392 | $ 1392.00 |
Standard Packaging5000/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Linear, Compass (ICs) | |
| Manufacturer | MEMSIC | |
| Packaging | LGA-16(3x3) | |
| Current - Supply | 450uA | |
| Magnetic Sensing Range(X,Y) | ±8Gs | |
| Operating Temperature | -40℃~+105℃ | |
| Output bit | 18bit | |
| Voltage - Supply | 2.8V~3.6V | |
| Magnetic Sensing Range(Z) | ±8Gs | |
| Interface Type | I2C;SPI |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 5000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The MMC5983MA is an AEC-Q100 qualified complete 3-axis magnetic sensor with on-chip signal processing and integrated I2C/SPI bus suitable for use in automotive applications. The device can be connected directly to a microprocessor, eliminating the need for A/D converters or timing resources.
It can measure magnetic fields within the full scale range of ±8 Gauss (G), with 0.25mG/0.0625mG per LSB resolution at 16bits/18bits operation mode and 0.4 mG total RMS noise level, enabling heading accuracy of ±0.5° in electronic compass applications.
An integrated SET/RESET function provides for the elimination of error due to Null Field output change with temperature. Temperature information from the integrated temperature sensor is available over the I2C Interface. The SET/RESET function can be performed for each measurement, periodically, or when the temperature changes by a predetermined amount as the specific application requires.
In addition, the SET/RESET function clears the sensors of any residual magnetic polarization resulting from exposure to strong external magnets.
The MMC5983MA is packaged in a low profile LGA package and an operating temperature range from -40℃ to +105℃.
The MMC5983MA provides an I2C digital output with 400 KHz, fast mode operation, and a 10MHz SPI digital output.
Features
- Fully integrated 3-axis magnetic sensor and electronic circuits requiring fewer external components
- Superior dynamic range and accuracy:
- ±8G FSR
- 18bits operation
- 0.4mG total RMS noise
- Enables heading accuracy of ±0.5°
- Max output data rate of 1000Hz
- Industrial standard low profile package 3.0mm x 3.0mm x 1.0mm
- Degaussing with built-in SET/RESET function
- Eliminates thermal variation induced offset error (Null field output)
- Clears the residual magnetization resulting from strong external fields
- On-chip sensitivity compensation
- On-chip temperature sensor
- Data_Ready Interrupt
- Low power consumption
- 1μA power down current
- I2C Slave, FAST(≤400KHz) mode
- 3.0V single low power supply
- SPI interface available
- RoHS compliant
Applications
- Electronic Compass & Navigation
- Position Sensing
- General Purpose Magnetic Field Measurements
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |