- Pinout Diagram
- Footprint Diagram
MAXIM MAX275AEWP+T
| Manufacturer | |
| MPN | MAX275AEWP+T |
| LCSC Part # | C3615540 |
| Packaging | SOIC-20 |
| Customer # | |
| Key Attributes | 4th- and 8th-Order Continuous-Time Active Filters |
| Datasheet |  MAXIM MAX275AEWP+T |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Filters - Active | |
| Manufacturer | MAXIM | |
| Packaging | SOIC-20 |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 1000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The MAx274 and MAx275 are continuous-time active filters consisting of independent cascadable 2nd-order sections. Each section can implement any all-pole bandpass or lowpass filter response, such as Butterworth, Bessel, and Chebyshev, and is programmed by four external resistors. The MAx274/MAx275 provide lower noise than switched-capacitor filters, as well as superior dynamic performance - both due to the continuous-time design. Since continuous-time filters do not require a clock, aliased and clock noise are eliminated with the MAX274/MAX275.
Features
- Continuous-Time Filter - No Clock, No Clock Noise
- Implement Butterworth, Chebyshev, Bessel and Other Filter Responses
- Lowpass, Bandpass Outputs
- Operate from a Single +5V Supply or Dual ±5V Supplies
- Design Software Available
- 8th-Order - Four 2nd-Order Sections (MAx274), 4th-Order - Two 2nd-Order Sections (MAx275)
- Center-Frequency Range: 150kHz for MAX274, 300kHz for MAX275
- Low Noise: -86dB THD Typical for MAX274, -89dB THD Typical for MAX275
- Center-Frequency Accurate Over Temp: within ±1% for MAX274, within ±0.9% for MAX275
Applications
- Low-Distortion Anti-Aliasing Filters
- DAC Output Smoothing Filters
- Modems
- Audio/Sonar Frequency Filtering
- Vibration Analysis
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 11.4899$ 10.2261 | $ 10.23 |
| 10+ | $ 10.1117$ 8.9995 | $ 90.00 |
| 30+ | $ 8.2282$ 7.3231 | $ 219.69 |
| 100+ | $ 7.5245$ 6.6969 | $ 669.69 |
Standard Packaging1000/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Filters - Active | |
| Manufacturer | MAXIM | |
| Packaging | SOIC-20 |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 1000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The MAx274 and MAx275 are continuous-time active filters consisting of independent cascadable 2nd-order sections. Each section can implement any all-pole bandpass or lowpass filter response, such as Butterworth, Bessel, and Chebyshev, and is programmed by four external resistors. The MAx274/MAx275 provide lower noise than switched-capacitor filters, as well as superior dynamic performance - both due to the continuous-time design. Since continuous-time filters do not require a clock, aliased and clock noise are eliminated with the MAX274/MAX275.
Features
- Continuous-Time Filter - No Clock, No Clock Noise
- Implement Butterworth, Chebyshev, Bessel and Other Filter Responses
- Lowpass, Bandpass Outputs
- Operate from a Single +5V Supply or Dual ±5V Supplies
- Design Software Available
- 8th-Order - Four 2nd-Order Sections (MAx274), 4th-Order - Two 2nd-Order Sections (MAx275)
- Center-Frequency Range: 150kHz for MAX274, 300kHz for MAX275
- Low Noise: -86dB THD Typical for MAX274, -89dB THD Typical for MAX275
- Center-Frequency Accurate Over Temp: within ±1% for MAX274, within ±0.9% for MAX275
Applications
- Low-Distortion Anti-Aliasing Filters
- DAC Output Smoothing Filters
- Modems
- Audio/Sonar Frequency Filtering
- Vibration Analysis
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8548900001 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8548900001 |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |