LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
TI LM73100RPWR product image
  • LM73100RPWR thumbnail 1
  • LM73100RPWR thumbnail 2
  • LM73100RPWR thumbnail 3
  • Pinout Diagram
  • Footprint Diagram
Images for reference only

TI LM73100RPWRRoHS

Manufacturer
MPN
LM73100RPWR
LCSC Part #
C3210761
Packaging
VQFN-10-HR(2x2)
Customer #
Key Attributes
Integrated ideal diode with input reverse polarity protection and overvoltage protection functions
Datasheetpdf iconTI LM73100RPWR

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/OR Controllers, Ideal Diodes
ManufacturerTI
PackagingVQFN-10-HR(2x2)
Quiescent Current426uA
Operating temperature-40℃~+125℃
Voltage - Forward(Vf@If)28.4mV
RDS(on)44.85mΩ
Input Voltage (Vin)2.7V~23V
FunctionReverse current blocking;Reverse polarity protection;Overvoltage lockout;Under-voltage lockout;Over temperature protection;Short-Circuit Protection;With enable

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging3000
Sales UnitPiece

Introduction

AI Translation

The LM73100 is a highly integrated circuit protection and power management solution in a small package. This device can provide multiple protection modes with few external components and is very effective in protecting against voltage surges, reverse polarity, reverse current, and excessive surge current. With features such as an integrated back-to-back FET and always blocking reverse current from the output to the input, this device is well-suited for power multiplexer/ORing applications. This device uses a linear ORing-based scheme to ensure almost zero DC reverse current and mimics the behavior of an ideal diode with ultra-low forward voltage drop and power dissipation. Applications with specific requirements for surge current can set the output slew rate through a single external capacitor. By cutting off the output when the input exceeds an adjustable overvoltage threshold, the load can be protected from input overvoltage conditions. This device can also provide a fast trip response to transient overcurrent events during steady-state operation. This device can accurately detect the output load current on the analog current monitoring pin. This device is available in a 2mm x 2mm 10-pin HotRod QFN package, which is designed to improve thermal performance and reduce system size. The device is rated for an operating junction temperature range of –40°C to +125°C.

Features

AI Translation
  • Wide operating input voltage range: 2.7V to 23V, absolute maximum 28V, withstands negative voltages up to -15V
  • Integrated back-to-back FETs with low on-resistance: RON = 28.4mΩ (typical)
  • Ideal diode operation with true reverse current blocking
  • Fast overvoltage protection with 1.2μs response time (typical)
  • Adjustable overvoltage lockout (OVLO)
  • Fast blanking response to transient overcurrent during steady state with 500ns response time (typical)
  • Latch-off after fault
  • Analog load current monitor output (IMON), current range: 0.5A to 5.5A, accuracy: ±15% (maximum) (IOUT ≥ 1A)
  • Active-high enable input with adjustable undervoltage lockout threshold (UVLO)
  • Adjustable output slew rate control (dVdt)
  • Overtemperature protection
  • Power good indicator (PG) with adjustable threshold (PGTH)
  • Small footprint: QFN 2mm x 2mm, 0.45mm pitch

Applications

AI Translation
  • Power Mux/ORing
  • Adapter Input Protection
  • Set-Top Box/Smart Speaker
  • USB PD Port Protection
  • PC/Laptop/Monitor/Docking Station
  • Power Tools/Chargers
  • POS Terminal
In-Stock: 20,716
20,716 In stock, ships now
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 0.6646$ 0.66
10+$ 0.5417$ 5.42
30+$ 0.4819$ 14.46
100+$ 0.4221$ 42.21
500+$ 0.3849$ 192.45
1,000+$ 0.3671$ 367.10
Standard Packaging3000/Full Reel
Better price for more quantity?
$