TE Connectivity 1415039-1

These relay products are remotely actuated to control electrical power flow by either interrupting or completing an electrical circuit.

• Low height 10.0mm
• Sensitive 200mW coil
• Mono - or bistable coil
• WG type available (IEC 60335 - 1)
• PCB area 200mm2
• Wash tight
• Slim outline
• Ambient temperature up to 105℃
• Compact size
• TV - 3 ratings for NO contact
• Miniature size
• 4kV coil - contacts (OJ/OJT)
• Meet UL TV - 5 ratings (OJT)
• 1 pole 3A/5A
• Only 5mm wide
• Allows high function/packaging density
• RoHS compliant (Directive 2002/95/EC)
• 5mm wide slim outline
• Strong coil pins for DIN - rail socket
• Reflow solderable version
• Low height 12.3mm
• Reinforced insulation
• Pinnings 3.2mm and 5mm
• High inrush currents with AgSnO contacts
• 4kV/8mm coil - contact
• High performance version available
• High ambient temperature version (105℃)
• AgNi and AgSnO contact versions
• THR (reflow) version
• DC and AC coil
• Bifurcated contacts
• For inrush peak currents up to 80A
• Inrush peak currents up to 370A
• 16A rated fluorescent load acc. EN60669 - 1
• 8A electronic ballast acc. UL508
• 1 1/2 HP motor load acc. UL508
• High Inrush peak currents up to 165A (20ms) and 800A (200µs)
• RTS3T: 5A Electronic ballast acc. UL508
• RTSET: 8A Electronic ballast acc. UL508
• Test tab (manual operator) optional for RTT3T bistable versions
• Inrush peak currents up to 120A (20ms)
• Sealed version available
• 2 pole 8A
• 1.5mm contact gap per pole
• Compact and simple design gives high process security
• Compact relay with 1 form A and 1 form C contact arrangement
• High breaking capacity
• PCB and quick connect connections
• 4kV coil - contact
• PCB and quick connect and chassis mount version
• 1 pole 35A (T9S)/40A (T9V)
• Contact gap 1.5mm/1.8mm min.
• Ambient temperature up to 85℃ at 35A
• Switching capacity 7500VA
• DC or AC coil
• 4kV/8mm coil - contact
• PCB or quick connect connections or chassis mount
• Quick connect terminal for load (PCF only)
• Height 26.5mm
• Meet 4kV dielectric voltage between coil and contact
• Ambient temperature 85℃
• Specially designed to meet the requirements for solar
• Contact gap 1.5mm/1.8mm min.
• 200mW hold power
• 1 pole 60A, 1 form A (NO) contact
• Polarized bistable (latching) with 1 or 2 coils
• NEMA 410 - 2011, 16A, 277VAC, electronic ballast; 20A branch circuit
• 480A inrush, 2.1m sec
• Hermetically sealed - intrinsically safe
• Designed accordance to AIAG QS9000
• No position sensitive
• RoHS compliance
• Contact ratings to 50A
• Magnetic blowout available for switching DC loads
• SPDT auxiliary switch available
• Class B insulation system

• Lighting control
• Bus actuator
• Power distribution
• Circuit protection
• Inverter