Infineon/CYPRESS CY8C24533-24PVXIT

The PSoC family consists of many programmable system-on-chips with on-chip controller devices. These devices are designed to replace multiple traditional MCU-based system components with one, low-cost single-chip programmable device. PSoC devices include configurable blocks of analog and digital logic, and programmable interconnects. This architecture allows the user to create customized peripheral configurations that match the requirements of each individual application. Additionally, a fast central processing unit (CPU), flash program memory, SRAM data memory, and configurable I/O are included in a range of convenient pinouts and packages. The PSoC architecture is comprised of four main areas: PSoC core, digital system, analog system, and system resources. Configurable global busing allows all the device resources to be combined into a complete custom system. The PSoC CY8C24x33 family can have up to three I/O ports that connect to the global digital and analog interconnects, providing access to four digital blocks and four analog blocks.

• Powerful Harvard-architecture processor
• M8C processor speeds to 24 MHz, 8×8 multiply, 32-bit accumulate
• Low power at high speed
• 3.0 - 5.25-V operating voltage
• Industrial temperature range: -40 ℃ to +85 ℃
• Advanced peripherals (PSoC blocks)
• Four rail-to-rail analog PSoC blocks provide: Up to 14-bit ADCs, Up to 8-bit DACs, Programmable gain amplifiers, Programmable filters and comparators
• Four digital PSoC blocks provide: 8- to 32-bit timers and counters, 8- and 16-bit pulse-width modulators (PWMs), CRC and PRS modules, Full-duplex UART, Multiple SPI masters or slaves, Connectable to all GPIO pins
• Complex peripherals by combining blocks
• High-speed 8-bit SAR ADC optimized for motor control
• Precision, programmable clocking
• Internal ±5% 24-/48-MHz oscillator
• High accuracy 24 MHz with optional 32-kHz crystal and PLL
• Optional external oscillator, up to 24 MHz
• Internal oscillator for watchdog and sleep
• Flexible on-chip memory
• 8-KB flash program storage, 50,000 erase/write cycles
• 256 bytes SRAM data storage
• In-system serial programming (ISSP)
• Partial flash updates
• Flexible protection modes
• EEPROM emulation in flash
• Programmable pin configurations
• 25-mA sink on All GPIO
• Pull-up, pull-down, high Z, strong, or open drain drive modes on all GPIO
• Up to eight analog inputs on GPIO plus two additional analog inputs with restricted routing
• Two 30-mA analog outputs on GPIO
• Configurable interrupt on all GPIOs
• Additional system resources
• I²C slave, master, and multi-master to 400 kHz
• Watchdog and sleep timers
• User-configurable low-voltage detection
• Integrated supervisory circuit
• On-chip precision voltage reference
• Complete development tools
• Free development software (PSoC Designer)
• Full-featured in-circuit emulator (ICE) and programmer
• Full-speed emulation
• Complex breakpoint structure
• 128-KB trace memory