GigaDevice Semicon Beijing GD25Q128ESIGR

The GD25Q128E (128M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), I/O3 (HOLD#/RESET#). The Dual I/O data is transferred with speed of 266Mbit/s, and the Quad I/O data is transferred with speed of 532Mbit/s.

• 128M-bit Serial Flash
• 16M-Byte
• 256 Bytes per programmable page
• Standard, Dual, Quad SPI
  • Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#, RESET#
  • Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#, RESET#
  • Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3, RESET#
• Fast Program/Erase Speed
  • Page Program time: 0.5ms typical
  • Sector Erase time: 45ms typical
  • Block Erase time: 0.15s/0.25s typical
  • Chip Erase time: 50s typical
• Flexible Architecture
  • Uniform Sector of 4K-Byte
  • Uniform Block of 32/64K-Byte
• High Speed Clock Frequency
  • 133MHz for fast read with 30PF load
  • Dual I/O Data transfer up to 266Mbits/s
  • Quad I/O Data transfer up to 532Mbits/s
• Low Power Consumption
  • 14μA typical standby current
  • 1μA typical deep power down current
• Software/Hardware Write Protection
  • Write protect all/portion of memory via software
  • Enable/Disable protection with WP# Pin
  • Top/Bottom Block protection
• Advanced Security Features
  • 128-bit Unique ID for each device
  • Serial Flash Discoverable parameters (SFDP) register
  • 3x1024-Byte Security Registers With OTP Locks
• Endurance and Data Retention
  • Minimum 100,000 Program/Erase Cycles
  • 20-year data retention typical
• Allows XiP (eXecute in Place) Operation
  • High speed Read reduce overall XiP instruction fetch time
  • Continuous Read with Wrap further reduce data latency to fill up SoC cache
• Single Power Supply Voltage
  • Full voltage range: 2.7-3.6V
• Package Information
  • SOP8 208mil
  • SOP16 300mil
  • USON8 (4x4mm, 0.45mm thickness)
  • WSON8 (6x5mm)
  • WSON8 (8x6mm)
  • TFBGA-24ball (6x4 Ball Array)
  • TFBGA-24ball (5x5 Ball Array)