SEMTECH GV7704-IBE3
| Manufacturer | |
| MPN | GV7704-IBE3 |
| LCSC Part # | C2693242 |
| Packaging | LBGA-169(11x11) |
| Customer # | |
| Key Attributes | Quad HD-VLC Receiver |
| Datasheet |  SEMTECH GV7704-IBE3 |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Video Processing | |
| Manufacturer | SEMTECH | |
| Packaging | LBGA-169(11x11) | |
| Data Rate | 2.97Gbps | |
| Interface | I2S | |
| Voltage - Supply | 1.14V~1.26V;1.71V~1.89V | |
| Features | Link equalization and compensation;Video format detection;Jitter and bit error tolerance | |
| Operating Temperature | -20℃~+85℃ | |
| Type | Receiver |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 176 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The GV7704 is a quad channel serial digital video receiver for High Definition component video. With integrated high performance cable equalizer technology, the GV7704 is capable of receiving compressed video at 270Mb/s or 540Mb/s, or uncompressed at 1.485Gb/s or 2.97Gb/s, over 75Ω coaxial cable, or differentially over a 100Ω twisted pair cable. The GV7704 integrates the High Definition Visually Lossless CODEC (HD - VLC™) technology, which has been developed specifically to reduce the transmission data rate of HD video over both coaxial and unshielded twisted pair (UTP) cable. This is achieved by encoding the HD video, normally transmitted at a serial data rate of 1.485Gb/s, to the same rate as Standard Definition (SD) video, at 270Mb/s serial data rate. At 270Mb/s, the effect of cable loss is greatly reduced, resulting in much longer cable transmission. For 75Ω coaxial cable, cable reach can be extended up to 3x the normal reach when transmitting encoded HD at 270Mb/s. In typical video over coaxial installations, cable distances of up to 550m are possible. Similarly, a 2.97Gb/s 3G signal can be transmitted at 540Mb/s using HD - VLC. The GV7704 can also be configured to receive HD and 3G video over UTP cable, such as Cat - 5e and Cat - 6 cable, when HD - VLC encoded at 270Mb/s and 540Mb/s, respectively. The device supports the reception of both 8 - bit and 10 - bit per pixel YCbCr 4:2:2 BT.1120 component digital video. A single 10 - bit wide parallel digital video output bus per channel is provided, with associated pixel clock and timing signal outputs. The GV7704 supports direct interfacing of HD video formats conforming to ITU - R BT.709 and BT.1120 - 6 for 1125 - line formats, and SMPTE ST 296 for 750 - line formats. The GV7704 supports the extraction of ancillary data from the horizontal blanking of the input video data stream. Ancillary data packets can be accessed via the GSPI, allowing downstream communication from the video source to sink device. The GV7704 recognizes data packets formatted in compliance with the HDcctv 2.0 communications protocol. The GV7704 features an audio de - embedding core, which provides the extraction of up to 4 channels of I²S serial digital audio from the ancillary data space of the input video data stream. The audio de - embedding core supports 32kHz, 44.1kHz, and 48kHz sample rates. Packaged in a space saving 169 ball 11 x 11mm BGA, the GV7704 is ideal for high density, multi - channel video recorder architectures. Typically requiring only 810mW of power, the device does not require any special heat sinking or air flow, reducing the over cost of HD DVR designs.
Features
- Quad channel serial digital video receiver for HD and 3G video surveillance and HDcctv applications
- Quad rate operation: 270Mb/s, 540Mb/s, 1.485Gb/s, and 2.97Gb/s
- Supports HDcctv 1.0, HD - SDI (ST 292), 3G - SDI (ST 424), and SD - SDI (ST 259)
- Four independent receiver channels with high performance cable equalization, with support for 50/75Ω coaxial and twisted pair cable transmission
- Integrated High Definition Visually Lossless CODEC (HD - VLC™) for extended cable reach:
- HD over 550m of Belden 543945 CCTV coax at 270Mb/s
- Full HD over 300m of Belden 543945 CCTV coax at 540Mb/s
- HD over 150m of Cat - 5e/6 UTP cable at 270Mb/s
- Serial digital loop - though output per channel
- Integrated audio de - embedder for the extraction of up to 4 channels of I²S serial digital audio at 32kHz, 44.1kHz and 48kHz sample rates, per video channel
- Supports both 720p and 1080p HD formats:
- Full HD: 1080p50/59.94/60fps
- HD: 1080p25/29.97/30fps
- HD: 720p25/29.97/30/50/59.94/60fps
- Four 8/10 - bit BT.1120 compliant output video interfaces, with embedded TRS and external HVF timing outputs
- Automatic independent detection of HD - SDI and HD - VLC video input data streams per channel
- Downstream ancillary data detection and extraction
- Automatic HDcctv Stream ID detection
- 4 - wire Gennum Serial Peripheral Interface (GSPI 2.0) for external host command and control
- JTAG test interface
- 1.2V core voltage power supplies
- 1.8V digital I/O power supply
- Small footprint 169 - BGA (11mm x 11mm)
- Low power operation, typically 810mW
- Wide operating temperature range: - 20°C to +85°C
- Pb - free and RoHS compliant
Applications
- Digital video recorders (DVR)
- Video servers
- Video multiplexers
- Video PC capture cards
- HDcctv peripherals
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 13.2748 | $ 13.27 |
| 10+ | $ 11.5143 | $ 115.14 |
| 30+ | $ 10.4401 | $ 313.20 |
| 100+ | $ 9.5411 | $ 954.11 |
Standard Packaging176/Full Tray | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Video Processing | |
| Manufacturer | SEMTECH | |
| Packaging | LBGA-169(11x11) | |
| Data Rate | 2.97Gbps | |
| Interface | I2S | |
| Voltage - Supply | 1.14V~1.26V;1.71V~1.89V | |
| Features | Link equalization and compensation;Video format detection;Jitter and bit error tolerance | |
| Operating Temperature | -20℃~+85℃ | |
| Type | Receiver |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 176 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The GV7704 is a quad channel serial digital video receiver for High Definition component video. With integrated high performance cable equalizer technology, the GV7704 is capable of receiving compressed video at 270Mb/s or 540Mb/s, or uncompressed at 1.485Gb/s or 2.97Gb/s, over 75Ω coaxial cable, or differentially over a 100Ω twisted pair cable. The GV7704 integrates the High Definition Visually Lossless CODEC (HD - VLC™) technology, which has been developed specifically to reduce the transmission data rate of HD video over both coaxial and unshielded twisted pair (UTP) cable. This is achieved by encoding the HD video, normally transmitted at a serial data rate of 1.485Gb/s, to the same rate as Standard Definition (SD) video, at 270Mb/s serial data rate. At 270Mb/s, the effect of cable loss is greatly reduced, resulting in much longer cable transmission. For 75Ω coaxial cable, cable reach can be extended up to 3x the normal reach when transmitting encoded HD at 270Mb/s. In typical video over coaxial installations, cable distances of up to 550m are possible. Similarly, a 2.97Gb/s 3G signal can be transmitted at 540Mb/s using HD - VLC. The GV7704 can also be configured to receive HD and 3G video over UTP cable, such as Cat - 5e and Cat - 6 cable, when HD - VLC encoded at 270Mb/s and 540Mb/s, respectively. The device supports the reception of both 8 - bit and 10 - bit per pixel YCbCr 4:2:2 BT.1120 component digital video. A single 10 - bit wide parallel digital video output bus per channel is provided, with associated pixel clock and timing signal outputs. The GV7704 supports direct interfacing of HD video formats conforming to ITU - R BT.709 and BT.1120 - 6 for 1125 - line formats, and SMPTE ST 296 for 750 - line formats. The GV7704 supports the extraction of ancillary data from the horizontal blanking of the input video data stream. Ancillary data packets can be accessed via the GSPI, allowing downstream communication from the video source to sink device. The GV7704 recognizes data packets formatted in compliance with the HDcctv 2.0 communications protocol. The GV7704 features an audio de - embedding core, which provides the extraction of up to 4 channels of I²S serial digital audio from the ancillary data space of the input video data stream. The audio de - embedding core supports 32kHz, 44.1kHz, and 48kHz sample rates. Packaged in a space saving 169 ball 11 x 11mm BGA, the GV7704 is ideal for high density, multi - channel video recorder architectures. Typically requiring only 810mW of power, the device does not require any special heat sinking or air flow, reducing the over cost of HD DVR designs.
Features
- Quad channel serial digital video receiver for HD and 3G video surveillance and HDcctv applications
- Quad rate operation: 270Mb/s, 540Mb/s, 1.485Gb/s, and 2.97Gb/s
- Supports HDcctv 1.0, HD - SDI (ST 292), 3G - SDI (ST 424), and SD - SDI (ST 259)
- Four independent receiver channels with high performance cable equalization, with support for 50/75Ω coaxial and twisted pair cable transmission
- Integrated High Definition Visually Lossless CODEC (HD - VLC™) for extended cable reach:
- HD over 550m of Belden 543945 CCTV coax at 270Mb/s
- Full HD over 300m of Belden 543945 CCTV coax at 540Mb/s
- HD over 150m of Cat - 5e/6 UTP cable at 270Mb/s
- Serial digital loop - though output per channel
- Integrated audio de - embedder for the extraction of up to 4 channels of I²S serial digital audio at 32kHz, 44.1kHz and 48kHz sample rates, per video channel
- Supports both 720p and 1080p HD formats:
- Full HD: 1080p50/59.94/60fps
- HD: 1080p25/29.97/30fps
- HD: 720p25/29.97/30/50/59.94/60fps
- Four 8/10 - bit BT.1120 compliant output video interfaces, with embedded TRS and external HVF timing outputs
- Automatic independent detection of HD - SDI and HD - VLC video input data streams per channel
- Downstream ancillary data detection and extraction
- Automatic HDcctv Stream ID detection
- 4 - wire Gennum Serial Peripheral Interface (GSPI 2.0) for external host command and control
- JTAG test interface
- 1.2V core voltage power supplies
- 1.8V digital I/O power supply
- Small footprint 169 - BGA (11mm x 11mm)
- Low power operation, typically 810mW
- Wide operating temperature range: - 20°C to +85°C
- Pb - free and RoHS compliant
Applications
- Digital video recorders (DVR)
- Video servers
- Video multiplexers
- Video PC capture cards
- HDcctv peripherals
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 5A991B1 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 5A991B1 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |