LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
MaxLinear SP3072EEN-L/TR product image
  • SP3072EEN-L/TR thumbnail 1
  • SP3072EEN-L/TR thumbnail 2
  • SP3072EEN-L/TR thumbnail 3
  • Pinout Diagram
  • Footprint Diagram
Images for reference only

MaxLinear SP3072EEN-L/TRRoHS

Manufacturer
MPN
SP3072EEN-L/TR
LCSC Part #
C2692300
Packaging
SOIC-8
Customer #
Key Attributes
±15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS-422 Transceivers
Datasheetpdf iconMaxLinear SP3072EEN-L/TR

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers
ManufacturerMaxLinear
PackagingSOIC-8
Voltage - Supply3.3V
TypeTransceiver
Data Rate250Kbps
Number of Nodes256
Operating Temperature-40℃~+85℃
ESD Protect±15kV
Number of Drivers1
DuplexHalf-Duplex
FeaturesHot-swap protection;Overcurrent Protection;Low-power mode;Thermal shutdown protection
Number of Receivers1
Quiescent Supply Current800uA

Additional Information

TypeDetails
Minimum5
Multiple5
Standard Packaging2500
Sales UnitPiece

Introduction

AI Translation

The SP3070E - SP3078E differential line transceivers are suitable for bidirectional communication on balanced multi- point bus transmission lines and comply with both RS- 485 and RS- 422 EIA Standards. Each device consists of a differential driver and differential receiver. All devices operate from a 3.3V power supply. High receiver input impedance allows a large number of transceivers to share a common data bus while maintaining signal margin and without excessive loading or use of expensive repeaters. The high impedance driver output is maintained over the entire common- mode voltage range from - 7 to +12V. Receivers will failsafe to logic 1 output when inputs are open, shorted or terminated. Drivers include built- in short- circuit protection and a thermal- overload shutdown to protect against excessive power dissipation from bus contention or cable faults. All RS- 485 receiver inputs and driver outputs are ESD protected up to ± 15kV Air- Gap and Human Body Model) and up to ± 8kV Contact Discharge (IEC 61000- 4- 2). The SP3070E - SP3078E devices may not achieve optimal transmit performance if the connected receiver includes a biasing network to 5.0V without a termination resistor.

Features

AI Translation
  • ±15kV ESD protection for RS- 485 pins
  • 3.3V low- power operation
  • Advanced receiver- failsafe protection for open, shorted or terminated lines
  • Up to 256 transceivers may share Bus
  • Very low load for 8x greater fanout
  • Hot Swap glitch protection RE and DE
  • Thermal shutdown protects against driver contention
  • Available in three industry standard footprints
  • SP3070E, SP3073E and SP3076E in Full- Duplex (14- pin)
  • SP3071E, SP3074E and SP3077E in Full- Duplex (8- pin)
  • SP3072E, SP3075E and SP3078E in Half- Duplex (8- pin)
  • Three applications- optimized speed grades
  • SP3070E - SP3072E: 250kbps slew- limited
  • SP3073E - SP3075E: 500kbps slew- limited
  • SP3076E - SP3078E: 16Mbps high speed
  • Small form factor NSOIC packages
  • Industrial (- 40 to 85°C) and Extended (- 40 to 125°C) temperature grades

Applications

AI Translation
  • Industrial Control
  • Utility Meters
  • Building Automation
  • Instrumentation
  • Point of Sale
In-Stock: 16,425
16,425 In stock, ships now
Add to BOM List
QtyUnit PriceTotal Amount
5+$ 0.5098$ 2.55
50+$ 0.4105$ 20.53
150+$ 0.3681$ 55.22
500+$ 0.3144$ 157.20
2,500+$ 0.2899$ 724.75
5,000+$ 0.2769$ 1384.50
Standard Packaging2500/Full Reel
Better price for more quantity?
$