TI CC3200MODR1M2AMOBT

Start your design with an industry-leading programmable wireless MCU module certified by FCC, IC, CE, and Wi-Fi CERTIFIED, featuring built-in Wi-Fi connectivity. The SimpleLink CC3200MOD is purpose-built for IoT — a wireless MCU module integrating an Arm Cortex-M4 MCU that enables customers to develop complete applications with a single device. With on-chip Wi-Fi, Internet connectivity, and robust security protocols, you can achieve faster development without prior Wi-Fi experience. The CC3200MOD integrates all required system-level hardware components in a QFM package, including clocks, SPI flash, RF switch, and passive components, enabling easy assembly and low-cost PCB design. The CC3200MOD device is a complete platform solution that includes software, sample applications, tools, user and programming guides, reference designs, and TI E2E support community.

The application MCU subsystem contains an industry-standard Arm Cortex-M4 core operating at 80MHz.

The device includes a wide range of peripherals such as a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and a four-channel ADC. The CC3200 family includes flexible embedded RAM for code and data, ROM with an external serial flash bootloader and peripheral drivers, and SPI flash for Wi-Fi network processor service packs, Wi-Fi certificates, and credentials.

The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a-chip along with a dedicated Arm MCU that significantly offloads the application MCU. The subsystem contains an 802.11 b/g/n radio, baseband, and MAC with a powerful cryptographic engine using 256-bit encryption for fast and secure Internet connectivity. The CC3200MOD supports Station, Access Point, and Wi-Fi Direct modes. The device also supports WPA2 Personal and Enterprise security as well as WPS 2.0. The Wi-Fi Internet-on-a-chip includes an embedded TCP/IP and TLS/SSL stack, HTTP server, and multiple Internet protocols. The power management subsystem includes an integrated DC/DC converter supporting a wide range of supply voltages. The subsystem supports low-power modes such as an RTC hibernate mode requiring less than 7μA.

• Fully integrated module including all required clocks, SPI flash, and passive components
• Modular FCC, IC, TELEC, and CE certifications help customers save effort, time, and cost
• Wi-Fi Alliance members can apply for certificate transfer of Wi-Fi CERTIFIED modules
• 1.27mm pitch QFM package for easy assembly and low-cost PCB design
• Application MCU subsystem:
  • Arm Cortex-M4 core operating at 80MHz
  • Embedded memory:
    • Integrated serial flash
    • RAM (up to 256KB)
    • Peripheral drivers using ROM
  • Hardware crypto engine for advanced hardware security, including:
    • AES, DES, and 3DES
    • SHA and MD5
    • CRC and checksum
  • 8-bit parallel camera
  • 1 multichannel audio serial port (McASP) interface with I2S format support
  • 1 SD (MMC) interface
  • 32-channel micro direct memory access (μDMA)
  • 2 UART
  • 2 SPI
  • 1 general-purpose timer (GPT) with I²C
  • 16-bit PWM mode
  • 1 watchdog timer module
  • 4-channel, 12-bit ADC
  • Up to 25 independently programmable GPIO pins
• Wi-Fi network processor subsystem:
  • 802.11 b/g/n radio, baseband, and MAC
  • TCP/IP stack
  • 8 simultaneous TCP, UDP, or RAW sockets
  • 2 simultaneous TLS v1.2 or SSL 3.0 sockets
  • ARP, ICMP, DHCP, DNS, and mDNS support
  • HTTP server with built-in programmable HTML pages for cross-network device configuration
  • Robust crypto engine with 256-bit encryption for fast and secure WLAN connection
  • Station, access point, and Wi-Fi Direct modes
  • WPA2 personal and enterprise security
  • SimpleLink connection manager for Wi-Fi security state management
  • TX power:
    • 17.0dBm at 1 DSSS
    • 17.25dBm at 11 CCK
    • 13.5dBm at 54 OFDM
  • RX sensitivity:
    • –94.7dBm at 1 DSSS
    • –87.0dBm at 11 CCK
    • –73.0dBm at 54 OFDM
  • Application throughput:
    • UDP: 16Mbps
    • TCP: 13Mbps
• Power management subsystem:
  • Integrated DC/DC converter with wide supply voltage range:
    • V_BAT: 2.3 to 3.6V
  • At 3.6V:
    • RTC hibernate: 7μA
    • Low-power deep sleep: < 275μA
    • RX traffic: 59mA at 54 OFDM
    • TX traffic: 229mA at 54 OFDM
  • Package and operating conditions:
    • 1.27mm pitch, 63-pin, 20.5mm×17.5mm QFM package for easy assembly and low-cost PCB design
    • Operating temperature range: -40°C to +85°C
• Additional integrated components:
  • 40.0MHz crystal
  • 32.768kHz crystal (RTC)
  • 8Mbit SPI serial flash
  • RF filters and passive components
• Module supports the SimpleLink developer ecosystem

• Home appliances
• Building automation
• Security systems
• Smart energy
• Internet gateways
• Industrial control
• Smart plugs and metering
• Wireless communications
• Wearables
• IoT