ST STSPIN32G0602Q

The STSPIN32G0602 is a system-in-package device offering an integrated solution for driving three-phase applications. It integrates a microcontroller and a 600 V three-phase half-bridge gate driver capable of driving N-channel power MOSFETs or IGBTs. The device incorporates a comparator with advanced smart shutdown functionality, ensuring fast and effective protection against overload and overcurrent conditions. Integrated high-voltage bootstrap diodes, along with cross-conduction prevention, dead time insertion, and UVLO protection on both low-side and high-side driver sections, prevent the power switches from operating under inefficient or hazardous conditions. Matched propagation delays between the low-side and high-side sections guarantee cycle distortion-free operation. The built-in microcontroller is based on a high-performance 32-bit Arm Cortex-M0+ core running at up to 64 MHz, featuring a memory protection unit to enhance application safety. With a rich feature set — including a 12-bit ADC, an internal voltage reference buffer, one general-purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, two 16-bit low-power timers, and a 5-channel DMA capable of performing data transfers between memory-mapped peripherals and/or memories to offload the CPU — this microcontroller is ideally suited for advanced motor control applications. It also integrates high-speed memory with multiple protection mechanisms, up to 32 available GPIOs, major communication interfaces, comprehensive power-saving modes, and an analog independent power supply input for the ADC. Such a feature-rich microcontroller enables sensorless or sensored single-, dual-, or three-shunt field-oriented control, as well as more traditional six-step commutation schemes. The STSPIN32G0602 also provides comprehensive protection features and an extended operating temperature range, ensuring reliable operation even in the most demanding industrial applications. A serial wire debug interface is provided for microcontroller firmware programming and debugging.

• Three-phase gate driver with high-voltage rail up to 600 V, dV/dt transient immunity ±50 V/ns, gate drive voltage range 9 V to 20 V
• Driver current capability: source/sink 1.00 A/0.85 A at 25℃
• 32-bit ARM Cortex-M0+ MCU core: clock frequency up to 64 MHz, 8 KB SRAM with hardware parity, 64 KB Flash with protection and secure area, CRC calculation unit
• Up to 32 GPIO ports
• 1 advanced timer for motor control, 16-bit, up to 6 PWM channels
• 5 general-purpose timers
• 2 low-power timers
• 12-bit ADC, conversion rate up to 2 MSps
• 5-channel DMA controller with flexible mapping
• Internal high-precision voltage reference
• Complete interface set: 2× I²C, 2× SPI, 3× UART and 1× low-power UART
• Matched propagation delay across all channels
• Integrated bootstrap diode
• Comparator for fast overcurrent protection
• Under-voltage lockout, interlocking, and dead-time functions
• Smart shutdown function
• Standby mode with low power consumption
• On-chip debug support via Serial Wire Debug
• Extended operating temperature range: -40℃ to +125℃
• QFN 10×10 72-pin package, 0.5 mm pitch, 1.8 mm creepage distance

• Three-phase motor drivers
• Inverters
• Industrial equipment and fans