Hynetek HP3600-AB001-SP16R

The HP3600 isolated driver is an isolated dual channel gate driver can be configured as high-side/low-side drivers. The peak source output current is 4.0A and the peak sink output current is 6.0A. Programmable dead time (DT) feature is available. Pulling high the DIS pin shuts down both outputs simultaneously and allows for normal operation when the DIS pin is open or pulled low. As a fail-safe measure, primary-side logic failures force both outputs low. The VDDA and VDDB supply voltage are up to 33 V. A wide input VDDI range from 3 V to 18 V makes the driver suitable for interfacing with both analog and digital controllers. All the supply voltage pins have under voltage lock-out (UVLO) protection. The HP3600 has 3.0kVRMS isolation for 1 minute per UL 1577 in SOP-16 package. High CMTI, low propagation delay makes the HP3600 is suitable for a wide range of isolated MOSFET and SiC or GaN FET gate drive applications.

• Common-mode transient immunity (CMTI) greater than 150 kV/μs
• Fast input-to-output propagation (48 ns)
• 4-A peak source, 6-A peak sink output
• Up to 33-V VDD output drive supply
• 3-V VDD UVLO
• -5V handling capability on input stage
• Fast clamping of the output under UVLO conditions
• Programmable overlap and dead time
• Fast disable for power sequencing
• SOP-16 package
• Operating junction temperature range of -40 °C to 150 °C

• Telecom PSU
• Data center
• Outdoor PSU
• OBC
• EV charging
• Industry automation
• Home appliance