- Pinout
- Footprint
HXY MOSFET SN75LBC184DR-HXY
| Manufacturer | HXY MOSFETAsian Brands |
| MPN | SN75LBC184DR-HXY |
| LCSC Part # | C22386557 |
| Packaging | SOP-8 |
| Customer # | |
| Key Attributes | RS-485/RS-422 Transceivers |
| Datasheet |  HXY MOSFET SN75LBC184DR-HXY |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | HXY MOSFET | |
| Packaging | SOP-8 | |
| Voltage - Supply | 4.75V~5.25V | |
| Type | Transceiver | |
| Data Rate | 250Kbps | |
| Number of Nodes | 128 | |
| Operating Temperature | 0℃~+70℃ | |
| ESD Protect | ±15kV | |
| Number of Drivers | 1 | |
| Duplex | Half-Duplex | |
| Features | Tx/Rx enable;Enable shutdown;Fail-safe;Thermal shutdown protection;Low-power mode | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 300uA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 5 |
| Multiple | 5 |
| Standard Packaging | 100 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
SN75LBC184 and SN65LBC184 are differential data line transceivers in the industry-standard SNx5LBC184 package, with built-in protection against high-energy noise transients. This feature significantly improves reliability, making them superior to most existing devices in resisting noise transients coupled to data cables. These circuits provide reliable, low-cost, direct-coupled (no isolation transformer required) data line interfaces without external components. SN75LBC184 and SN65LBC184 can withstand overvoltage transients of 400W peak (typical). The standard combination wave specified in IEC 61000-4-5 simulates overvoltage transients and models unidirectional surges caused by overvoltages resulting from switching and secondary lightning transients.
Features
- Integrated transient voltage suppression
- Bus terminal ESD protection exceeds: ±30kV IEC 61000-4-2 contact discharge, ±15kV IEC 61000-4-2 air gap discharge, ±15kV EIA/JEDEC human body model
- Compliant with IEC 61000-4-5, providing 400W peak (typical) circuit damage protection
- Controlled driver output voltage slew rate allows longer cable stub lengths
- Supports 250kbps data rate in electrically noisy environments
- Open-circuit fail-safe receiver design
- 1/4 unit load allows up to 128 devices on the bus
- Thermal shutdown protection
- Power-up/power-down glitch protection
- Each transceiver meets or exceeds TIA/EIA-485 (RS-485) and ISO/IEC 8482:1993(E) requirements
- Low disabled supply current, 300μA maximum
- Pin-compatible with SNx5LBC184
Applications
- Industrial networking
- Energy meters
| Qty | Unit Price | Total Amount |
|---|---|---|
| 5+ | $ 0.3527 | $ 1.76 |
| 50+ | $ 0.2819 | $ 14.10 |
| 200+ | $ 0.2516 | $ 50.32 |
| 500+ | $ 0.2137 | $ 106.85 |
| 2,500+ | $ 0.1969 | $ 492.25 |
| 5,000+ | $ 0.1868 | $ 934.00 |
Standard Packaging100/Full Tube | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | HXY MOSFET | |
| Packaging | SOP-8 | |
| Voltage - Supply | 4.75V~5.25V | |
| Type | Transceiver | |
| Data Rate | 250Kbps | |
| Number of Nodes | 128 | |
| Operating Temperature | 0℃~+70℃ | |
| ESD Protect | ±15kV | |
| Number of Drivers | 1 | |
| Duplex | Half-Duplex | |
| Features | Tx/Rx enable;Enable shutdown;Fail-safe;Thermal shutdown protection;Low-power mode | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 300uA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 5 |
| Multiple | 5 |
| Standard Packaging | 100 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
SN75LBC184 and SN65LBC184 are differential data line transceivers in the industry-standard SNx5LBC184 package, with built-in protection against high-energy noise transients. This feature significantly improves reliability, making them superior to most existing devices in resisting noise transients coupled to data cables. These circuits provide reliable, low-cost, direct-coupled (no isolation transformer required) data line interfaces without external components. SN75LBC184 and SN65LBC184 can withstand overvoltage transients of 400W peak (typical). The standard combination wave specified in IEC 61000-4-5 simulates overvoltage transients and models unidirectional surges caused by overvoltages resulting from switching and secondary lightning transients.
Features
- Integrated transient voltage suppression
- Bus terminal ESD protection exceeds: ±30kV IEC 61000-4-2 contact discharge, ±15kV IEC 61000-4-2 air gap discharge, ±15kV EIA/JEDEC human body model
- Compliant with IEC 61000-4-5, providing 400W peak (typical) circuit damage protection
- Controlled driver output voltage slew rate allows longer cable stub lengths
- Supports 250kbps data rate in electrically noisy environments
- Open-circuit fail-safe receiver design
- 1/4 unit load allows up to 128 devices on the bus
- Thermal shutdown protection
- Power-up/power-down glitch protection
- Each transceiver meets or exceeds TIA/EIA-485 (RS-485) and ISO/IEC 8482:1993(E) requirements
- Low disabled supply current, 300μA maximum
- Pin-compatible with SNx5LBC184
Applications
- Industrial networking
- Energy meters
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | - |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | - |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |