LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
Rayson RS70B32G4S15G product image
  • RS70B32G4S15G thumbnail 1
  • RS70B32G4S15G thumbnail 2
  • RS70B32G4S15G thumbnail 3
  • Pinout
  • Footprint
Images for reference only

Rayson RS70B32G4S15GRoHS

Manufacturer
RaysonAsian Brands
MPN
RS70B32G4S15G
LCSC Part #
C22375657
Packaging
TFBGA-153(11.5x13)
Customer #
Key Attributes
eMMC5.1
Not available now

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Memory/Memory (ICs)
ManufacturerRayson
PackagingTFBGA-153(11.5x13)
Memory Size32GB
Operating temperature-25℃~+85℃
Reading Speed in Sequence310MB/S
Writing Speed in Sequence190MB/S
NAND Flash Type-
NAND Stand-By Current50uA
Controller Stand-By Current100uA
NAND Operating Voltage (VCCF)2.7V~3.6V
InterfaceeMMC 5.1
Controller Operating Voltage (VCCQ)1.7V~1.95V;2.7V~3.6V
Report an ErrorShow similar products (0) >

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging152
Sales UnitPiece

Introduction

AI Translation

Rayson eMMC product is a high quality and cost advantage embedded storage solution and compatible with JEDEC standard eMMC5.1 specification. Its strong ECC engine significantly improves error correction enabling longer device lifetime and an increased ability to handle higher raw bit error rate. The Rayson eMMC product consists of NAND flash and an eMMC controller. The eMMC controller and software directly manage NAND flash, including ECC, wear-leveling, bad block management, garbage collection and performance optimization, and manage interface protocols. This architecture insulates any revision of NAND flash from the eMMC Host, makes the eMMC device easy to integrate and accelerates time-to-market.

Features

AI Translation
  • eMMC 5.1 specification compatibility
  • Backward compatible to eMMC 4.41/4.51/5.0
  • Bus mode Data bus width: 1 bit (default), 4 bits, 8 bits
  • Data transfer rate: up to 400MB/s (HS400)
  • Clock frequency: 0 ~ 200MHz
  • Operating voltage range VCC: 2.7 - 3.6V, VCC0: 1.7 - 1.95V or 2.7 - 3.6V
  • Support Hardware ECC engine
  • Support auto power saving mode
  • Preventing from sudden-power-off
  • Support features defined in JEDEC standard RPMB
  • Boot partition Write protection
  • Erase, discard, trim, sanitize
  • HPI
  • Background operations
  • Device health report
  • Field firmware update(FFU)
  • Sleep / awake
  • Packed command