Digilent 410-393
| Manufacturer | |
| MPN | 410-393 |
| LCSC Part # | C22319878 |
| Packaging | - |
| Customer # | |
| Key Attributes | Embedded Complex Logic (FPGA, CPLD) Evaluation Boards RoHS |
| Datasheet |  Digilent 410-393 |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Embedded Complex Logic (FPGA, CPLD) Evaluation Boards | |
| Manufacturer | Digilent | |
| Packaging | - |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 1 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The Eclypse Z7 is Digilent's latest FPGA/SoC development board, designed for ultra-high-speed and highly modular systems, built around the Xilinx Zynq®-7000 SoC family. Combined with Zmod expansion modules and Digilent's new software architecture, it forms a powerful research and prototyping platform optimized for productivity and accelerated design workflows, making it an ideal choice for instrumentation applications such as software-defined radio, ultrasound, and medical technology. As a carrier board for SYZYGY-compatible Zmod expansion modules, the Eclypse Z7 is designed with high flexibility, eliminating the need to start from scratch and avoiding unnecessary overhead. Users can get started with the Eclypse Z7 immediately, as it supports PetaLinux out of the box. The pre-built Linux image includes a software API for bulk data transfer. Digilent provides fully open and customizable hardware designs, Linux images, and Linux software applications.
Features
- Zynq 7020 SoC
- 667 MHz dual-core ARM Cortex-A9 processor
- 13,300 logic cells
- 1GB DDR3L memory, 32-bit bus @ 1866 MHz
- 2x SYZYGY standard interface connectors for Zmod expansion
- Standard support for data rates up to 500 MHz
- 2x Pmod connectors for Pmod expansion
- Micro USB port for USB-UART and JTAG programming
- JTAG programming interface
- Programming mode selection jumper: JTAG, QSPI, SD
- Ethernet connector with 10/100/1000 Ethernet PHY
- MAC address pre-loaded into QSPI flash during production
- Micro USB connector for user USB host/device/OTG
- MicroSD card slot
- Power jack
- 12V, up to 5A
- 2x user RGB LEDs
- 125 MHz oscillator connected to Zynq PL for PL-only designs
- 2x user buttons
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 246.8333 | $ 246.83 |
| 200+ | $ 231.8255 | $ 46365.10 |
| 500+ | $ 224.0789 | $ 112039.45 |
| 1,000+ | $ 220.2513 | $ 220251.30 |
Standard Packaging1/Full Box | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Embedded Complex Logic (FPGA, CPLD) Evaluation Boards | |
| Manufacturer | Digilent | |
| Packaging | - |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 1 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The Eclypse Z7 is Digilent's latest FPGA/SoC development board, designed for ultra-high-speed and highly modular systems, built around the Xilinx Zynq®-7000 SoC family. Combined with Zmod expansion modules and Digilent's new software architecture, it forms a powerful research and prototyping platform optimized for productivity and accelerated design workflows, making it an ideal choice for instrumentation applications such as software-defined radio, ultrasound, and medical technology. As a carrier board for SYZYGY-compatible Zmod expansion modules, the Eclypse Z7 is designed with high flexibility, eliminating the need to start from scratch and avoiding unnecessary overhead. Users can get started with the Eclypse Z7 immediately, as it supports PetaLinux out of the box. The pre-built Linux image includes a software API for bulk data transfer. Digilent provides fully open and customizable hardware designs, Linux images, and Linux software applications.
Features
- Zynq 7020 SoC
- 667 MHz dual-core ARM Cortex-A9 processor
- 13,300 logic cells
- 1GB DDR3L memory, 32-bit bus @ 1866 MHz
- 2x SYZYGY standard interface connectors for Zmod expansion
- Standard support for data rates up to 500 MHz
- 2x Pmod connectors for Pmod expansion
- Micro USB port for USB-UART and JTAG programming
- JTAG programming interface
- Programming mode selection jumper: JTAG, QSPI, SD
- Ethernet connector with 10/100/1000 Ethernet PHY
- MAC address pre-loaded into QSPI flash during production
- Micro USB connector for user USB host/device/OTG
- MicroSD card slot
- Power jack
- 12V, up to 5A
- 2x user RGB LEDs
- 125 MHz oscillator connected to Zynq PL for PL-only designs
- 2x user buttons
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 4A994B |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 4A994B |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |