R-K Electronics, Inc. SP130A1-4

R-K Spike Protectors are applied to control and instrumentation loop circuits where transient electrical voltages can cause malfunctions or damage to solid state controls or process systems. The Spike Protectors are designed to control voltage spikes within a tolerable level while minimizing any effect to the analog control signals. The SPs are typically connected in parallel with the signal leads and ground at the controller. The varistor combinations allow the excessive voltage spikes to dissipate line to line and line to ground.

• 45VDC, 55VAC, 130VAC, & 250VAC Ratings
• Ground Connection
• Varistor & Triode Combinations
• Stranded Wire Leads
• Analog Circuit Protection
• Solid State Output Protection

• control and instrumentation loop circuits