Cirrus Logic CS4207-CNZR
| Manufacturer | |
| MPN | CS4207-CNZR |
| LCSC Part # | C2151107 |
| Packaging | QFN-48(6x6) |
| Customer # | |
| Key Attributes | Low-power, 4-in / 6-out HD Audio Codec with Headphone Amp |
| Datasheet |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Audio Special Purpose | |
| Manufacturer | Cirrus Logic | |
| Packaging | QFN-48(6x6) | |
| Resolution (Bits) | 32kHz~192kHz | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Asynchronous sample rate conversion;On-chip digital gain;Mute control | |
| Interface | Serial | |
| Voltage - Supply | 1.5V~1.8V;3.3V~5V |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 4000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The CS4207 is a highly integrated multi-channel lowpower HD Audio Codec featuring 192 kHz DACs, 96 kHz ADCs, 192 kHz S/PDIF Transmitters and Receiver, Microphone pre-amp and bias voltage, and a ground centered Headphone driver. Based on multi-bit, delta-sigma modulation, it allows infinite sample rate adjustment between 32 kHz and 192 kHz. The ADC input path allows control of a number of features. The microphone input path includes a selectable programmable-gain pre-amplifier stage and a low-noise MIC bias voltage supply. A PGA is available for line and microphone inputs and provides analog gain with soft ramp and zero cross transitions. The ADC also features an additional digital volume attenuator with soft ramp transitions. The stereo headphone amplifier is powered from a separate internally generated positive supply, with an integrated charge pump providing a negative supply. This allows a ground-centered analog output with a wide signal swing and eliminates external DC-blocking capacitors. The integrated digital audio interface receiver and transmitters utilize a 24-bit, high-performance, monolithic CMOS stereo asynchronous sample rate converter to clock align the PCM samples to/from the S/PDIF interfaces. Auto detection of non-PCM encoded data disables the sample rate conversion to preserve bit accuracy of the data. In addition to its many features, the CS4207 operates from a low-voltage analog and digital core, making this part ideal for portable systems that require low power consumption in a minimal amount of space. The CS4207 is available in a 48-pin WQFN package in both Automotive (-40°C to +105°C) and Commercial (-40°C to +85°C) grades.
Features
- DAC1 (Headphone) – 101 dB Dynamic Range (A-wtd), -89 dB THD+N
- Headphone Amplifier - GND Centered Integrated Negative-voltage Regulator, No DC-blocking Capacitor Required, 50 mW Power/Channel into 16Ω
- DAC2 & DAC3 (Line Outs) 110 dB Dynamic Range (A-wtd), -94 dB THD+N, Differential Balanced or Single-ended
- Each DAC Supports 32 kHz to 192 kHz Sample Rates Independently
- Digital Volume Control +6.0 dB to -57.5 dB in 0.5 dB Steps, Zero Cross and/or Soft Ramp Transitions
- Independent Support of D0 and D3 Power States for Each DAC
- Fast D3 to D0 Transition, Audio Playback in Less Than 50 ms
- ADC1 & ADC2: 105 dB Dynamic Range (A-wtd), -88 dB THD+N, Differential Balanced or Single-ended Inputs, Analog Programmable Gain Amplifier (PGA) ±12 dB, 1.0 dB Steps, with Zero Cross Transitions and Mute
- MIC Inputs: Pre-amplifier with Selectable 0 dB, +10 dB, +20 dB, and +30 dB Gain Settings, Programmable, Low-noise MIC Bias Level
- Each ADC Supports 8 kHz to 96 kHz Sample Rates Independently
- Additional Digital Attenuation Control – -13.0 dB to -51.0 dB in 1.0 dB steps, Zero Cross and/or Soft Ramp Transitions
- Digital Interface for Two Dual Digital Mic Inputs
- Independent Support of D0 and D3 Power States for Each ADC
- Digital Audio Interface Receiver: Complete EIAJ CP1201, IEC 60958, S/PDIF Compatible Receiver, 32 kHz to 192 kHz Sample Rate Range, Automatic Detection of Compressed Audio Streams, Integrated Sample Rate Converter – 128 dB Dynamic Range, -120 dB THD+N, Supports Sample Rates up to 192 kHz, 1:1 Input/Output Sample Rate Ratios
- Digital Audio Interface Transmitters: Two Independent EIAJ CP1201, IEC-60958, S/PDIF Compatible Transmitters, 32 kHz to 192 kHz Sample Rate Range
- System Features: Very Low D3 Power Dissipation of <7 mW, Jack Detect Active in D3, HDA BITCLK Not Required for D3 State, Jack Detect Does Not Require HDA Bus BITCLK, All Configuration Settings are Preserved in D3 State, Pop/Click Suppression in State Transitions, Detects Wake Event and Generates Power State Change Request when HDA Bus Controller is in D3, Variable Power Supplies: 1.5 V to 1.8 V Digital Core Voltage, 3.3 V to 5.0 V Analog Core Voltage, 3.3 V to 5.0 V Headphone Drivers, 1.5 V to 3.3 V HD Bus Interface Logic, 3.3 V Interface Logic levels for GPIO, S/PDIF, and Digital Mic, Individual Power-down Managed ADCs, DACs, PGAs, Headphone Driver, S/PDIF Receiver, and Transmitters
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 35.3519 | $ 35.35 |
| 30+ | $ 33.6126 | $ 1008.38 |
Standard Packaging4000/Full Reel | ||
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |

