- Pinout
- Footprint
DIODES DPS1135FIA-13
| Manufacturer | |
| MPN | DPS1135FIA-13 |
| LCSC Part # | C2150216 |
| Packaging | QFN-17-EP(4x4) |
| Customer # | |
| Key Attributes | 24V/5A 1-CH POWER SWITCH WITH FAST ROLE SWAP |
| Datasheet |  DIODES DPS1135FIA-13 |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | DIODES | |
| Packaging | QFN-17-EP(4x4) | |
| Operating Temperature | -40℃~+125℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse current blocking;Output discharge function;Soft-start;Reverse voltage protection | |
| number of channels | 1 | |
| Maximum Continuous Current | 5A | |
| Control Input Logic | Active High | |
| RDS(on) | 30mΩ | |
| Operating Voltage | 4.5V~24V | |
| Type | Load Switch |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 4000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The DPS1135 is part of a family of power switches optimized for USB power delivery and other hot- swap applications. Through the analog interface, an exception status is reported, and several functions can be programmed: current limit overvoltage protection, and output voltage ramping up. The fast role- swap function, which complies with the requirements defined in the USB Power Delivery Specification Release 3.0, V1.0a, is implemented. It is compatible to many popular USB Type C applications.
This device is designed to operate between 4V and 24V. It offers fast short- circuit response time to ensure system robustness. The integrated port- discharge function allows the voltage levels at the input and output ports to be discharged to meet the requirements of the USB Power Delivery Specification. Comprehensive fault detection and recovery mechanisms are provisioned to enable applications, which are subjected to heavy capacitive loads and the risk of short circuit. These mechanisms include: reverse voltage and current blocking, input overvoltage protection, output overcurrent, short- circuit protection, and over temperature shut- down. In addition, the rise time of output voltage can be adjusted to minimize in- rush current and to ensure system stability. Before any exception condition is notified via the low- active FAULTB signal, a deglitch of 7ms is applied to prevent false triggering.
The DPS1135 is housed in the low- profile and space- saving V- QFN4040- 17 package, which is manufactured with environmentally friendly material.
Features
- Wide Operating Voltage Range: 4V to 24V
- One- Channel Power Switch with Integrated Adjustable Current & Voltage Limits
- Ability to Discharge the Input and Output Ports either Individually or Simultaneously via Two External Control Pins
- Fast Short- Circuit Response Time at 2us
- Comprehensive Built- In Fault Detection and Recovery Mechanisms like Input Under Voltage Lock- Out, Reverse Voltage and Current Blocking, Thermal Shutdown, Overcurrent and Short- Circuit Protection
- RDS(ON) of Embedded MOSFET at 30mΩ
- Adjustable DV/DT Control at Start- Up
- Fault Reporting (FAULTB) with Blanking Time at 7ms Typical
- Fast Role Swap Supported
- UL Recognized, File No.E322375
- IEC62368- 1 CB Scheme Certified
- Totally Lead- Free & Fully RoHS Compliant
- Halogen and Antimony Free. "Green" Device
Applications
- Notebooks, desktops, AIO PCs, servers, and tablets
- Docking stations, universals and multimedia hubs
- FPTVs, PC monitors
- Set- Top boxes, residential gateways, storage devices
- Power protections in industrials and automotive applications
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 2.0542 | $ 2.05 |
| 10+ | $ 1.7591 | $ 17.59 |
| 30+ | $ 1.5749 | $ 47.25 |
| 100+ | $ 1.3858 | $ 138.58 |
| 500+ | $ 1.301 | $ 650.50 |
| 1,000+ | $ 1.2635 | $ 1263.50 |
Standard Packaging4000/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | DIODES | |
| Packaging | QFN-17-EP(4x4) | |
| Operating Temperature | -40℃~+125℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse current blocking;Output discharge function;Soft-start;Reverse voltage protection | |
| number of channels | 1 | |
| Maximum Continuous Current | 5A | |
| Control Input Logic | Active High | |
| RDS(on) | 30mΩ | |
| Operating Voltage | 4.5V~24V | |
| Type | Load Switch |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 4000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The DPS1135 is part of a family of power switches optimized for USB power delivery and other hot- swap applications. Through the analog interface, an exception status is reported, and several functions can be programmed: current limit overvoltage protection, and output voltage ramping up. The fast role- swap function, which complies with the requirements defined in the USB Power Delivery Specification Release 3.0, V1.0a, is implemented. It is compatible to many popular USB Type C applications.
This device is designed to operate between 4V and 24V. It offers fast short- circuit response time to ensure system robustness. The integrated port- discharge function allows the voltage levels at the input and output ports to be discharged to meet the requirements of the USB Power Delivery Specification. Comprehensive fault detection and recovery mechanisms are provisioned to enable applications, which are subjected to heavy capacitive loads and the risk of short circuit. These mechanisms include: reverse voltage and current blocking, input overvoltage protection, output overcurrent, short- circuit protection, and over temperature shut- down. In addition, the rise time of output voltage can be adjusted to minimize in- rush current and to ensure system stability. Before any exception condition is notified via the low- active FAULTB signal, a deglitch of 7ms is applied to prevent false triggering.
The DPS1135 is housed in the low- profile and space- saving V- QFN4040- 17 package, which is manufactured with environmentally friendly material.
Features
- Wide Operating Voltage Range: 4V to 24V
- One- Channel Power Switch with Integrated Adjustable Current & Voltage Limits
- Ability to Discharge the Input and Output Ports either Individually or Simultaneously via Two External Control Pins
- Fast Short- Circuit Response Time at 2us
- Comprehensive Built- In Fault Detection and Recovery Mechanisms like Input Under Voltage Lock- Out, Reverse Voltage and Current Blocking, Thermal Shutdown, Overcurrent and Short- Circuit Protection
- RDS(ON) of Embedded MOSFET at 30mΩ
- Adjustable DV/DT Control at Start- Up
- Fault Reporting (FAULTB) with Blanking Time at 7ms Typical
- Fast Role Swap Supported
- UL Recognized, File No.E322375
- IEC62368- 1 CB Scheme Certified
- Totally Lead- Free & Fully RoHS Compliant
- Halogen and Antimony Free. "Green" Device
Applications
- Notebooks, desktops, AIO PCs, servers, and tablets
- Docking stations, universals and multimedia hubs
- FPTVs, PC monitors
- Set- Top boxes, residential gateways, storage devices
- Power protections in industrials and automotive applications
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| Type | Details |
|---|---|
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |